Ctouch CLAP-55FHDA5 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Interaktives Whiteboard Ctouch CLAP-55FHDA5 herunter. Ctouch CLAP-55FHDA5 16 Seiten. Laser air+ series

Seite drucken

The power to engage

IMPORTANT SAFETY PRECAUTIONS

8. Overloading - Do not overload wall outlets, extension cords, or convenience receptacles

on other equipment as this can result in a risk of fire or electric shock.

9. Entering of objects and liquids - Never insert an object into the product through vents or openings.

High voltages are present in the product and inserting an object can cause electric shock and/or short

circuit internal parts. For the same reason, do not spill water or liquid on the product.

10. Servicing - Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged

in any way, such as the power-supply cord or plug is damaged, liquid has been spilled, objects have fallen into the

device, the device has been exposed to rain or moisture, does not operate normally or has been dropped.

11. Damage requiring service - If any of the following conditions occurs, unplug the power cord

from the AC outlet and request a qualified service technician to perform repairs.

a. When the power cord or plug is damaged.

b. When liquid is spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.

e. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not

described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.

If the product has been dropped or the cabinet has been damaged in any way.

g. When the product displays an abnormal condition or exhibits a distinct change in performance.

h. Any noticeable abnormality in the product indicates that the product needs servicing.

12. Replacement parts - in case the product needs replacement parts, make sure that the service person uses replacement

parts specified by the manufacturer, or those with the same characteristics and performance as the original parts.

Use of unauthorized parts can result in fire, electric shock and/or other danger and will affect the warranty.

13. Safety checks - Upon completion of service or repair work, request the service technician to

perform safety checks to ensure that the product is in proper operating condition.

14. Wall or ceiling mounting - When mounting the device on a wall or ceiling, be sure to install the

product according to the method recommended by the manufacturer. This is a safety issue.

15. Stand - Use only with the trolley stand or wall mount specified by the manufacturer, or sold with the device. Do not place

the product on an unstable trolley stand or wall mount. Placing the product on an unstable base can cause the product

to fall, resulting in possible serious injuries as well as damage to the device. When mounting the product on a wall, be sure

to follow the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer.

16. Careful move - When a trolley is used, be cautious when moving the trolley/device combination to avoid injury from the device

tipping over. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley.

Never attempt to move the CTOUCH interactive display unless the AC power cord has been disconnected.

17. Lightning - Unplug this device during thunder storm or when unused for long periods of time.

For added protection during a thunder storm, or when the CTOUCH interactive display is left unattended and unused for long periods

of time, unplug the AC power cord. This will prevent damage to the equipment due to lightning and power-line surges.

Laser Air Plus | User Manual

IMPORTANT SAFETY PRECAUTIONS

18. Do not use this device near water - for example near a bathtub, washbowl, kitchen sink, laundry tub,

in a wet basement or near a swimming pool. The device should not be exposed to dripping or splashing

liquids and that no objects filled with liquids, such as vases, shall be placed on the device.

19. Cleaning - Unplug the device from the power before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a soft lint-free cloth for cleaning.

20. Ventilation - Do not block any ventilation openings. Install the CTOUCH interactive display in accordance with the

manufacturer instructions. The vents and other openings in the cabinet are designed for ventilation. Do not cover

or block these vents and openings, since insufficient ventilation can cause overheating and/or shorten the life of

the product. Do not place the product on a rug or other similar surface, since they can block ventilation openings.

This product is not designed for built-in installation; therefore do not place the product in an enclosed space such

as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed.

21. Heat sources - Do not install near any heat sources such as radiators, heat registers,

stoves, or other device (including amplifiers) that produce heat.

22. Panel protection - The display panel used in this product is made of glass. Therefore, it can break when the product is dropped

or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the display panel breaks.

23. Pixel defect - The protective touch plate is a very high technology product, giving you fine detailed

pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue,

green or red. For futher information, please contact CTOUCH Service for our Pixel Policy.

WARNING: For continued safety, device with class I construction shall be connected to a mains socket outlet with a protective earthing

connection.

Laser Air Plus | User Manual