Acorn MASTER Series Montageanleitung Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Kontrolleinheit Acorn MASTER Series herunter. Acorn MASTER Series 7 Seiten.

Seite drucken

aligned,

the

ECONET

module

P.C.B

may

pressed

gently

into

place. The ECONET module is correctly seated when the barbs on the

tips of the P.C.B supports have cleared the surface of the ECONET

module P.C.B. An audible click should be heard when the barbs spring

into place securing the P.C.B.

T a k e c a r e n o t t o e x e r t t o o m u c h p r e s s u r e w h e n p r e s s i n g h o m e

t h e E C O N E T module P.C.B, this may lead to damage of the various

connectors.

I n s t a l l i n g t h e A N F S

Having fitted the ECONET module, it is necessary to fit .the

Advanced Network Filing System (ANFS) ROM.

The ANFS ROM should be inserted into one of three sockets, IC17,

23, or 29.

Although it may be inserted into socket 1038 if PL11 is made South

(refer to fig. 2) it must be noted that fitting ANFS in this way

will disable selection of external Rams via PL13.

T o

i n s e r t

t h e

A N F S

R O M ,

h o l d

t h e

e n d s

o f

t h e

I C

b e t w e e n

t h u m b

a n d

forefinger,

and

line

all

the

pins

over

the

destination socket. The pin 1 end of the IC (see NOTE 2) should

face to the WEST. If you are unsure of which way round the IC

should be installed, refer to the other ICs on the main PCB which

all face WEST.

Apply firm pressure to the IC, but do not force it. When the

chip is in place it may appear to be slightly raised. Check that

all the pins have entered the socket and that none are bent

either outwards or under the body of the IC.

When the ECONET module P.C.B and the ANFS ROM have been

installed, the re-assembly procedure is the reverse of the dismantling

procedure.

Your Compact Computer is now ready to be connected to a network,

see your Network Manager who will assign and set your station number.