Acorn OMEGA Anweisungen für Installation, Betrieb und Wartung - Seite 2

Blättern Sie online oder laden Sie pdf Anweisungen für Installation, Betrieb und Wartung für Kontrolleinheit Acorn OMEGA herunter. Acorn OMEGA 6 Seiten. Thermostatic mixing valve

Seite drucken
WARNING:
!
You are required to thoroughly read all installation
instructions and product safety information before
beginning the installation of this product.
FAILURE TO READ AND FOLLOW PROPER
INSTALLATION AND MAINTENANCE
INSTRUCTIONS MAY RESULT IN PRODUCT
FAILURE WHICH CAN CAUSE PROPERTY
DAMAGE, PERSONAL INJURY AND/OR
DEATH.
Acorn Controls is not responsible for damages
resulting from improper installation and/or
maintenance. Installation of this valve shall be in
accordance with Uniform Plumbing Code.
TO ENSURE ACCURATE AND RELIABLE
OPERATION OF THIS PRODUCT, IT IS
ESSENTIAL TO:
Properly design the system to minimize
Ÿ
pressure and temperature variations.
Implement an annual maintenance program
Ÿ
to ensure proper operation and temperature
setting of valve(s).
This valve is factory preset. However, it can
Ÿ
be adjusted. It is the responsibility of the
installer and or facility maintenance personnel
to make sure valve outlet temperature is
properly set.
Acorn Controls
Division of Acorn Engineering Company
Manual #7802-127-001
ST7017 Installation & Operation Manual

SUPPLIES REQUIRED:

(Not provided by Acorn)
1. Wall anchors, screws nuts and washers as
required.
2. Teflon tape for sealing water connections.
3. Supply angle stops, ball valves optionally
available.
4. Supply connections.
5. Wrench and an Allen wrench.
!
IMPORTANT
Ÿ
Flush supply lines of all foreign material such as
pipe dope, chips or solder prior to connecting to
mixing valve.
Ÿ
To ensure proper installation, review the Manual
thoroughly to verify rough-ins before beginning
any work.
Ÿ
Installation and field adjustment are the
responsibility of the installer.
Ÿ
Maximum water pressure is 125 PSI (8.62
bars). Maximum inlet hot water temperature is
180°F (82°C). Temperature adjustment range*
is 95°F-130°F (35°C-54°C). Valve assembly
must be drained prior to being subjected to
freezing temperatures. Valve includes integral
check valves.
PRESSURE
5
CV
DROP
(34)
(69)
PSID (KPA)
1/2" TUBE
6
FLOW RATE
2.8
(22.7)
(34)
GPM (LPM)
3/4" TUBE
7
3.2
FLOW RATE
(26.5)
(37.9)
GPM (LPM)
, A member of Morris Group International
®
10
15
20
30
45
(103)
(138)
(207)
(310)
9
11
13
15
19
(41.6)
(49.2)
(56.8)
(72)
10
12
14
18
21
(45.4)
(53)
(68.1)
(79.5)
™
Date: 07/20/2020
60
(414)
22
(83.3)
25
(94.6)
Page 2 of 6