Clarus SEXTET Benutzerhandbuch Installation und Betrieb - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch Installation und Betrieb für AC-Stromverteilung Clarus SEXTET herunter. Clarus SEXTET 12 Seiten.

Seite drucken

PACKAGE CONTENTS

(1) Clarus Sextet

(1) Installation & Operation Guide

INSTALLATION OVERVIEW

The following is an overview for installing your Power Manager product.

Unpack all of the contents of the Clarus Sextet carton.

•

Plan your system and lay out all of the equipment that will be connected to the Clarus Sextet.

Place the Clarus Sextet in the location where it will be used, being sure to follow both the safety precautions listed

•

in the front of this manual. DO NOT plug the unit in yet.

•

Plug each of the components into the Clarus Sextet. You may want to make a note on paper listing the

components that are connected to each outlet.

•

With all of the attached components in the OFF position, plug the Clarus Sextet into the wall.

Depress the Clarus Sextet power button to turn on.

•

PLANNING YOUR SYSTEM

Think about which components need to work together, and place them in close proximity to one another. Be aware of

those products that generate the most heat and understand that excessive heat adversely affects your components.

Place them accordingly – allowing sufficient ventilation. You may also want to consider putting frequently handled

components in the most convenient locations. By carefully planning the system's architecture in advance, your Clarus

Sextet can be integrated into any configuration you choose.

PLACEMENT

It is recommended that the Clarus Sextet be placed in the same location as your other audio components so it can be

easily reached when manually operating the other controls in the system. There should be a clear line of sight between

the operator and the unit to allow easy user feedback of system status. The Clarus Sextet should be placed on a flat,

stable shelf or platform.

PLANNING YOUR AC CONNECTIONS

CONNECTING COMPONENTS TO CLARUS SEXTET

On the top panel there are six (6) AC outlets. For maximum performance, connect your analog devices into the

ANALOG outlets, digital components into the DIGITAL outlets and the high current components into the HIGH

CURRENT outlets. For convenience, any component may be connected into any outlet without causing harm to the

individual components. However, they may not be afforded maximum filtering and conditioning.

MAKING CONNECTIONS

All components in a system must be connected to a power conditoner in order for the system to be protected from

electrical disturbances and to achieve maximum noise filtering and line conditioning benefits. Failure to do this will

degrade system performance and leave it vulnerable to electrical damage.

CLARUS SEXTET Owner's Manual

6448 Pinecastle Blvd. Suite 101, Orlando FL 32809