Clarus Technologies PCS-25 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Reinigungsgeräte Clarus Technologies PCS-25 herunter. Clarus Technologies PCS-25 14 Seiten. Cleaning stations
Auch für Clarus Technologies PCS-25: Benutzerhandbuch (16 seiten)
Seite drucken
1. This manual describes the procedures required to operate the Clarus PARTS
WASHER. Every effort has been made by Clarus Technologies, LLC to assure the
accuracy and reliability of the information contained in this document. Clarus
Technologies, LLC, however, makes no representation, warranty, or guarantee in
connection with this manual and hereby expressly disclaims any liability or
responsibility for loss or damage resulting from its use or for the violation of any
federal, state, provincial or municipal regulation with which this publication may
conflict.
The electrical components of the Clarus Parts Washer have been designed and
2.
assembled with UL approved equipment where required.
WARNING
! The operational techniques used with this equipment are more
important than the design of the equipment for the safety of the worker.
Therefore, each technician involved in the operation of the Clarus Parts
Washer Cleaning Station must have the proper hazardous materials training.
DANGER!
This system can only be used with solvent that has a minimum
flashpoint of 140 Fahrenheit. Use of solvents with flashpoints lower than 140
Fahrenheit are likely to cause a fire, Injuries or death. If you are not sure of a
solvents flashpoint refer to the appropriate MSDS sheet.
3. Clarus is not undertaking to meet the duties of employers to warn and properly train
and equip their employees, and others exposed, concerning health and safety risks
and precautions, nor undertaking their obligations under local, state, provincial or
federal laws.
4. Information concerning safety and health risks and proper precautions with respect to
particular materials and conditions should be obtained from the employer, the
manufacturer or supplier of that material, or the Material Safety Data Sheet
("MSDS").
FOREWORD
3