Clary Corporation DT1000R Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für UPS Clary Corporation DT1000R herunter. Clary Corporation DT1000R 16 Seiten. Dtr (et) series continuous power system
Seite druckenCARE AND MAINTENANCE
T
his device is designed to be maintenance-free.
It can be cleaned with a damp cloth or
nonabrasive cleanser.
WARNING: Do not use ACETONE-BASE
cleaning solutions. Keep cleaning solutions out of
the electrical receptacles on this device.
Be sure filters, vents and fans are kept free from
accumulation of dust, dirt or lint. Below is a simple
maintenance schedule that will assist you in keeping
the system at its peak level of performance and also
minimizing potential premature failures.
Your system contains sealed maintenance-free
batteries. When situated in the proper environment,
with the proper charging and limited cycling, these
batteries can last many years.
WARNING: Never attempt to service batteries.
High voltage exists within the unit, which could
cause electrical shock. Servicing of batteries should
be performed or supervised by personnel
knowledgeable of batteries and the required
precautions. Keep unauthorized personnel away
from batteries. When replacing batteries, use the
same number and type batteries.
CAUTION - Do not dispose of battery or batteries
in a fire. The battery may explode.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
TIME
Every 6 mo.
Every 12 mo.
Every 42 mo.
Every 72 mo.
!
RECOMMENDED PREVENTATIVE MAINTENANCE SCHEDULE
TASK
Test battery operation, check back-up time
Thoroughly clean unit
Replace batteries
Replace cooling fan
T H E C O N T I N U O U S P O W E R C O M P A N Y
CAUTION - Do not open or mutilate the battery or
batteries. Released electrolyte is harmful to the skin
and eyes. It may be toxic.
CAUTION - A battery can present a risk of electrical
shock and high short circuit current. The following
precautions should be observed when working on
batteries.
1. Remove watches, rings, or other metal objects.
2. Use tools with insulated handles.
3. Wear rubber gloves and boots.
4. Do not lay tools or metal parts on top of
batteries.
5. Disconnect the charging source prior to
connecting or disconnecting battery terminals.
6. Determine if the battery is inadvertently
grounded. If inadvertently grounded, remove
source of ground. Contact with any part of a
grounded battery can result in electrical shock.
The likelihood of such shock will be reduced if
such grounds are removed during installation
and maintenance.
The internal rechargeable battery is recyclable. At
the end of its useful life, under various state and
local laws, it may be illegal to dispose of this battery
into the municipal waste stream. Check with the
factory for details in your area for recycling options
or proper disposal.
None
Vacuum, brush
TBD
Kit
Page 14
TOOLS REQ'D
INITIAL