CTR CW-3000 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wasserspender CTR CW-3000 herunter. CTR CW-3000 6 Seiten. Industrial circulation cooler

4. IMPORTANT WARNING NOTES

DO NOT

TURN THE WATER COOLING UNIT ON IF IT IS EMPTY.

Make sure

this unit.

Position the water cooling unit in a well-ventilated, dry environment that is not

near other heaters.

Make sure

other objects so that the air-flow is not obstructed.

When you are planning to not use your water cooling unit for a prolonged period

of time, it must be emptied of water.

When transporting the unit, it must be emptied of water.

If the water temperature drops below 10 °C, the water cooling unit will sound an

alarm and shut down. Only when the temperature raises above 20 °C will the

unit continue to work. DO NOT ALLOW THE WATER TO FREEZE.

To set up your water cooling unit, complete the following steps.

1/ Remove the packaging and make sure that the water cooling unit is complete

and without damage.

2/ Put the water unit into position and connect the outlet and inlet pipes.

3/ Remove the cap on the top of the water unit and carefully pour in distilled or

pure water so that the unit is three quarters full.

4/ Connect the mains socket and turn on the power.

5/ Wait one minute, then check the water level in the unit. The water level

should be 80-150mm from the top. If needed, top up the water level, then screw

the cap back onto the top of the water cooling unit.

If the cooler unit is an automatic version, you do not need to manually turn the

CTRfuture Ltd.

Tel: 0844 800 4727

British CNC machine manufacturers and suppliers

WATER COOLER USER MANUAL

that you only use the correct type of water (distilled or pure water) in

that the fan at the back of the unit is at least 150 mm away from any

Your water cooling system is now fully installed.

When you need to use this unit, simply turn on the power.

power on / off as it will do this automatically.

Fax: 0870 705 9639