CLAS OP 1418 Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Elektrowerkzeug CLAS OP 1418 herunter. CLAS OP 1418 8 Seiten. 3/8" d. butterfly impact wrench kit

OP 1418

3/8" D. BUTTERFLY IMPACT WRENCH KIT

USE & MAINTENANCE

Tool use and care

1. Use support handle or other practical ways to secure and support the work piece to a stable platform.

2. Do not force the tool. Use the correct tool for your application. The correct tool can do the job better and more

secure at the rate of tool designed.

3. Disconnect the air supply before making any adjustments, changing accessories, or storing the tool. Always

disconnect the air supply before performing any inspection, maintenance, or cleaning the tool.

4. Use only accessories recommended by the manufacturer for your model.

5. The butter y-style throttle valve to adjust speed smoothly in either direction in one continuous motion.

6. Do not leave the tool unattended when it is connected to an air supply.

7. Use compressed air only.

Air supply setup and connecting hazard

1. For best service you should incorporate a regulator, oiler and an inline lter.

2. If you are not using an automatic lubricating system, before operating the tool, add a few drops of Pneumatic

Tool Oil to the airline connection. Add more after each hour of constant using.

3. Do not exceed maximum air pressure of 90 PSI/ 6.2 bar or as stated on tool nameplate.

Lubrication & maintenance

Lubricate the tool daily with a good grade of air tool oil. If no air line oiler is used, run a teaspoon of oil through

the tool. The oil can be squirted into the tool air inlet, or into the hose at the nearest connection to the air supply,

then run the tool. The rust inhibitive oil is acceptable for air tools.