CTS MCT-3002 Series Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medienkonverter CTS MCT-3002 Series herunter. CTS MCT-3002 Series 2 Seiten. 10/100/1000base-t to 1000base-x or 100/1000base-x standalone media converter
Auch für CTS MCT-3002 Series: Kurzanleitung (2 seiten), Benutzerhandbuch (2 seiten), Benutzerhandbuch (2 seiten), Handbuch (2 seiten)

Seite drucken

Trademarks

CTS is a registered trademark of Connection Technology

Systems Inc. Contents subject to revision without prior

notice.

All other trademarks remain the property of their owners.

This publication may not be reproduced as a whole or in

part, in any way whatsoever unless prior consent has been

obtained from Connection Technology Systems Inc.

FCC Warning

The MCT-3002 Series converters have been tested and

found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These standards are

designed to provide reasonable protection against harmful

interference when these devices are operated in a

commercial environment. These devices generate, use,

and can radiate radio frequency energy and may cause

harmful interference to radio communications unless

installed in accordance with this User's Guide. Operation

of these devices in a residential area is likely to cause

harmful interference which will make the user responsible

for the appropriate remedial action at his / her own

expense.

CE Mark Warning

These are Class A products. In a domestic environment

these products may cause radio interference in which case

the user will need to consider adequate preventative

methods.

1. Checklist

The MCT-3002 package should contain the following

items:

- MCT-3002 Converter

- AC-DC Power Adapter

- This User's Guide

Please notify your sales representative immediately if any

items are missing or damaged.

2. Overview

The MCT-3002 series media converter converts traditional

twisted-pair RJ-45 cable into various fiber media including

multi-mode, single-mode, SC connector, bi-directional WDM,

or a SFP slot for pluggable fiber transceiver, extending

transmission distance for the deployment to the household,

apartment or campus.

MCT-3002 series media converter is fully compliant with IEEE

802.3, 802.3u, 802.3ab & 802.3z standards. Besides, it is

equipped with some switching features including store and

forward. Operation status can be locally monitored through a

set of Diagnostic LED located in the front panel.

Major Features:

- Auto-Negotiation in TP port

- MDI/MDI-X Auto-Crossover supported

- Support Link Alarm

- Support Jumbo Frame 9K bytes (under 10,100,1000Mbps)

- Store and Forward Switching Mechanism

- Support Auto & Force mode configuration

3. Installation



Attach a fiber cable from MCT-3002 to the fiber network.

The fiber connections must be matched – transmit socket to

receive socket.



Attach a UTP cable from the 10/100/1000BASE-T network

to the RJ-45 port on MCT-3002.



Connect the power adapter to MCT-3002 and the

PWR/STA LED will light up. The TP and F/O LEDs will light

up as soon as if all the cable connections are satisfactory.

Fig. 1 Dual Fiber Front Panel of MCT-3002 Converter

Fig. 2 WDM & SFP Front Panel of MCT-3002 Converter

Fig. 3 Rear Panel of MCT-3002 Converter

Fig. 4 Side Panel of MCT-3002 Converter

4. DIP SWITCH Setting

The default setting for PIN 1 through 7 is ON and PIN 8 is OFF.

PIN NO.

Function

TP Auto-Negotiation

Disable

Manual TP speed

Fiber Speed

Manual

Fiber Manual Speed

F/O mode

N/A

Link Alarm

Disable

NOTE:

1. Before adjusting the configuration of the DIP Switch, the

power should be unplugged.

2. Disable TP Auto-Negotiation function before configuring

TP speed manually.

3. The TP speed is fixed in 10Mbps when PIN 2 & 3 are both

set to ON or OFF.

4. The TP speed is fixed in 100Mbps when PIN 2 is set to ON

and PIN 3 is set to OFF.

5. The TP speed is fixed in 1000Mbps when PIN 2 is set to

OFF and PIN 3 is set to ON.

6. Under TP speed 1000Mbps, it supports full-duplex mode

only.

7. PIN 4 & PIN 5 are for dual rate model (MCT-3002-DR)

only.

OFF

Enable

Please refer to

NOTE 3,4 and 5

Auto-

Sensing

100M

1000M

Force

Auto

N/A

Enable