Lenovo 7X22 Schnellstart

Blättern Sie online oder laden Sie pdf Schnellstart für Server Lenovo 7X22 herunter. Lenovo 7X22 2 Seiten.

Lenovo ThinkSystem SD530 Compute Node Type 7X21

Lenovo ThinkSystem D2 Enclosure Type 7X20,

Modular Enclosure Type 7X22

Quick Start

In the box

Your shipping box contains the following items:

SD530 Compute Node Type 7X21



D2 Enclosure Type 7X20 or Modular Enclosure Type 7X22



Note: There will be one to four nodes per enclosure in the box

depending on your purchase.

Material box, including items such as power cords, printed



documentation and slide-rail installation kit.

If any item is missing or damaged, contact your place of purchase.

Ensure that you retain your proof of purchase and packing material.

They might be required to receive warranty service.

First glance

Note: Your solution might look slightly different from the illustrations.

Enclosure front view: Node bays

Node front view: Six 2.5-inch hot-swap drive model

Node front view: Four 2.5-inch hot-swap drive model

Enclosure rear view: Eight low-profile PCIe 3.0 x8 cards

Enclosure rear view: Four low-profile PCIe 3.0 x16 cards

System Management Module (SMM)

ThinkSystem

single Ethernet port SMM

Installing the solution

To install the solution, do the following:

1. Install the required solution components.

2. Install the enclosure into the rack.

See the Rack Installation Guide that was provided with the rail kit.

3. Connect the cables.

4. Turn on the compute nodes.

5. Connect the management controller to the network.

6. Configure the system.

For detailed information about installing hardware options and

configuring the system, see the following website:

http://thinksystem.lenovofiles.com/help/topic/7X21/introduction.html

PN: SP47A24250

Printed in China

ThinkSystem

dual Ethernet port SMM