Lenovo 14IAL7 Benutzerhandbuch - Seite 25

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Tablette Lenovo 14IAL7 herunter. Lenovo 14IAL7 34 Seiten.

Seite drucken

Change hotkey mode

Step 1.

Open the UEFI/BIOS setup utility.

Step 2.

Select Configuration ➙ Hotkey Mode and press Enter.

Step 3.

Change the setting to Disabled or Enabled.

Select Exit ➙ Exit Saving Changes.

Step 4.

Enable or disable always-on

For some Lenovo computers with always-on connectors, the always-on function can be enabled or disabled

in the UEFI/BIOS setup utility.

Step 1.

Open the UEFI/BIOS setup utility.

Step 2.

Select Configuration ➙ Always On USB and press Enter.

Step 3.

Change the setting to Disabled or Enabled.

Step 4.

Select Exit ➙ Exit Saving Changes.

Set passwords in UEFI/BIOS setup utility

This section introduces the types of passwords that you can set in the UEFI (Unified Extensible Firmware

Interface) or BIOS (Basic Input/Output System) setup utility.

Password types

You can set various types of passwords in the UEFI/BIOS setup utility.

Password type

Administrator password

User password

Master hard disk password

User hard disk password

Notes:

• All passwords set in the setup utility consist of alphanumeric characters only.

• If you start the setup utility using the user password, you can only change a few settings.

Set administrator password

You set the administrator password to prevent unauthorized access to the UEFI/BIOS setup utility.

Attention: If you forget the administrator password, a Lenovo authorized service personnel cannot reset

your password. You must take your computer to a Lenovo authorized service personnel to have the system

board replaced. Proof of purchase is required and a fee will be charged for parts and service.

Step 1.

Open the UEFI/BIOS setup utility.

Pre-requisite

The administrator password must be

set.

The master hard disk password must

be set.

Usage

You must enter it to start the setup

utility.

You can use the user password to

start the setup utility.

You must enter it to start the

operating system.

You can use the user hard disk

password to start the operating

system.

Chapter 3

Explore your computer