Lenovo A916 Benutzerhandbuch - Seite 21
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mobiltelefon Lenovo A916 herunter. Lenovo A916 24 Seiten.
settings
Note: the initial PIN code is generally 1234.
41
The common problems in the ninth chapter
Any problems in the use of mobile phone in the process, please refer to the
following methods to solve. If the problem persists, please immediately and
Association designated contact the dealer or repair business. The appearance of the
screen to enter the PIN code input (U) SIM card with valid PIN code. If you don't
know PIN code, contact your network operator immediately. The appearance of the
screen to enter the PUK code PIN code is entered incorrectly three times (U), your SIM
card will be locked, to unlock, you must enter the PUK code, if you don't know PUK
code, contact your network operator immediately. The appearance of the screen (U) is
inserted into the SIM card information confirmation (U) SIM card is installed
correctly. Check (U)SIM card is working properly, it may be defective or faulty. If
so, please deliver the network operators to resolve.
42
The display is not in the service area, the status icon network fault check the
signal strength. If there is no network signal, you can network blind area in the basement
or buildings in other areas to receive signals,please. There is another situation, you may
be
in
the
network
operator provides network services. The sound quality is poor, echo or noise makes
conversation difficult to hang up the phone, dial again, network operators may
Contact you with a better quality of the line. Standby time varying signal short seat is
weak, a long time to find the signal caused by mobile phone. When you do not want to
answer the phone, can temporarily shut down; or the battery usage time is too long, the
service life of the battery at the close, please replace with new battery.
Mobile phone can not boot check the battery or charging. In charge during
the open mobile phone, check.Mobile phone if long time static
43
Easy to make excessive battery discharge, at this time can not boot, the charging
start long period after noresponse, need to wait after the restoration of electricity to boot.
Cannot send a short message, you need to check your service center number option, to
see if you have set the SMS center number or the number of errors, you may
SMS service is not open, or short message object is invalid, network operators or your
area did not support the service (specific can consult the local network operators).
Not charging
restore
to
factory
default setting part
does
not
cover
Reset
>
backup
and restore factory
settings
the
area,
can
ask
your
network