Lenovo ThinkSystem NE2572 Schnellstart-Handbuch - Seite 15
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Schalter Lenovo ThinkSystem NE2572 herunter. Lenovo ThinkSystem NE2572 30 Seiten.
Auch für Lenovo ThinkSystem NE2572: Produkthandbuch (31 seiten)
Seite drucken
Installing ONIE
1. Download the ONIE image for the NE2572 from the following link:
2. Create a bootable USB flash drive using the downloaded ONIE image by following
these steps:
3. Plug in the bootable USB device into the switch using the USB convertor cable that
comes in the box with the NE2572.
4. Connect to the switch using the mini-USB serial console port. For more details, see
"Connecting to the NE2572" on page
5. After connecting to the switch, if the switch is operational, enter Privileged EXEC
configuration mode and reload the switch.
© Copyright Lenovo 2017
The ThinkSystem NE2572 RackSwitch comes out of the box with ONIE
pre-installed.
If you have removed ONIE from the switch, you can use the following steps to
reinstall it:
http://support.lenovo.com/
The ONIE image for the NE2572 is called:
onie-recovery-x86_64-lenovo_ne2572-r0.iso
Download and install an utility that allows you to create a bootable USB flash
drive. For example, you can use Rufus:
https://rufus.akeo.ie/
Launch Rufus and navigate to the "Create a bootable disk using" setting. Click
on the icon to the far right and select the previously downloaded ONIE image.
Select "DD Image" from the drop down list next to the "Create a bootable disk
using" setting.
Click the "Start" button and agree with any prompts that appear.
Your USB flash drive is now ready to boot ONIE.
NE2572> enable
NE2572# reload
6.
15
ONIE on the NE2572