Nikon EM Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Digitalkamera Nikon EM herunter. Nikon EM 17 Seiten.
Auch für Nikon EM: Benutzerhandbuch (36 seiten)

Nikon EM Benutzerhandbuch
Nikon EM
5. After closing the camera back, press the
shutter release button ❸.
7. Advance the film, press the shutter release
button and advance the film again until the
frame counter ❶ indicates "1" to start AUTO
operation.
If you release the shutter during "AUTO" operation with the cap mounted on the lens or in an
Note:
extra dark place, the reflex mirror ⓮ will remain in the "up" position. To return the mirror to its
original position, set the shutter operation mode selector ❷ to M90 or B.
B. Set ASA
1. Pull up the ASA film speed selector ring 26.
Q: What is ASA?
A: ASA is a number which indicates the relative sensitivity of your film to light. Your camera must
have this information to be able to give your film the proper exposure.
Q: What should I do to remember the ASA rating of the film loaded in the camera?
A: As a reminder, insert the film carton tab which indicates the ASA rating, into the camera back's
memo holder 41.
6. To take up film slack, turn the film rewind crank
24 in the direction of the engraved arrow, until you
feel a slight resistance. Be careful not to wind the
film back into the cassette.
Q: How can I be sure the film has been properly
loaded and is being advanced?
A: If, as you advance the film winder lever, the film
rewind knob rotates in the opposite direction of the
arrow engraved on it, you can be sure the film is
being properly advanced.
2. Turn it until the ASA film speed setting index 27
is aligned with your film's ASA rating.
Note: Don't forget to reset ASA when you use film
with different ASA ratings; otherwise, the film will
not be correctly exposed.
– 7 –
Owner's manual