Nikon One touch zoom QD Gebrauchsanweisung - Seite 14

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Digitalkamera Nikon One touch zoom QD herunter. Nikon One touch zoom QD 44 Seiten.

Loading film

Use DX-coded 35mm film (IS0100,200,400 or 1000). The film

speed is set automatically. With non DX-coded film, film speed is

set at ISO 100.

1 Open the camera back in the direction of the arrow.

2 Insert the film cartridge in the direction shown in the figure,

putting the bottom part in first.

3 Pull the film leader across a few centimeters, align it with the

yellow film mark, just beyond the film take-up spool, and set it

in the film guides. Ensure that the film is not slack.

4 Close the camera back until it clicks. The film is then

advanced to the first frame. Be sure to turn the power ON and

check that "1" appears in the frame counter after loading the

film.

Should the "E" sign blink in the frame counter when the power is

switched ON, open the camera back again and adjust the film

correctly.

With non DX-coded film, an unblinking "E" sign appears in the

frame counter.

Note: When loading the film, avoid exposure to direct sunlight by

moving into the shade.