Nikon AF Micro-Nikkor 60 mm f/2.8D Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kameraobjektiv Nikon AF Micro-Nikkor 60 mm f/2.8D herunter. Nikon AF Micro-Nikkor 60 mm f/2.8D 2 Seiten.

Seite drucken

Nikon AF Micro-Nikkor 60 mm f/2.8D Benutzerhandbuch

English

Thank you for purchasing a Nikon product. The light, compact AF

■ ■

Focusing Screens

Micro-Nikkor 60 mm f/2.8D micro lens has a minimum focus dis-

The cameras below support a variety of focusing screens for use

tance of 0.219 m (0.72 ft.) and can supply distance information

with diff erent lenses or in diff erent situations. The following screens

to the camera body for instantaneous 3D matrix metering or 3D

are suited for use with this lens (when using B2/B3, E2/E3, or K2/K3

multi-sensor balanced fi ll-fl ash fl ash control. Before using this prod-

screens with cameras not listed here, refer respectively to columns

uct, please carefully read both these instructions and the camera

B, E, or K):

manual so you can get the most out of your lens now and for years

Screen

EC-B/

to come.

Camera

EC-E A/L

EC-E

A/L

B B

C C D D

■ ■

For Your Safety

CAUTIONS

F5+ DP-30

• Do not disassemble. Touching the internal parts of the camera or lens

could result in injury. In the event of malfunction, the product should be

F5+ DA-30

repaired only by a qualiﬁ ed technician. Should the product break open

(+0.5) (+0.5) (+0.5)

as the result of a fall or other accident, remove the camera battery and/

F4+ DP-20/

or disconnect the AC adapter and then take the product to a Nikon-

F4+ DA-20

authorized service center for inspection.

• Turn the camera off immediately in the event of malfunction. Should you notice

smoke or an unusual smell coming from the equipment, immediately

Screen

unplug the AC adapter and remove the camera battery, taking care to

Camera

H2 H2 H3 H3 H4 H4

J J

avoid burns. Continued operation could result in ﬁ re or injury. After re-

moving or disconnecting the power source, take the equipment to a

F5+ DP-30

Nikon-authorized service center for inspection.

• Do not use in the presence of fl ammable gas. Operating electronic equipment

F5+ DA-30

(+0.5)

in the presence of ﬂ ammable gas could result in explosion or ﬁ re.

F4+ DP-20/

• Do not look at the sun through the lens or the camera viewfi nder. Viewing the

F4+ DA-20

sun or other bright light source through the lens or viewﬁ nder could

cause permanent visual impairment.

Recommended.

• Keep out of reach of children. Particular care should be taken to prevent in-

Vignetting visible in viewﬁ nder (photographs are not aﬀ ected).

fants from putting the batteries or other small parts into their mouths.

• Observe the following precautions when handling the lens and camera:

Split-screen display does not improve focus accuracy.

- Keep the lens and camera dry. Failure to observe this precaution could

( ):

Figures in parentheses give the exposure compensation for cen-

result in ﬁ re or electric shock.

ter-weighted metering. Select "Other screen" for Custom Setting

- Do not handle the lens or camera with wet hands. Failure to observe

b6 ("Screen comp. " ) when adjusting exposure compensation for

this precaution could result in electric shock.

the F6; note that with screens other than B or E, "Other screen"

- Keep the sun well out of the frame when shooting backlit subjects.

must be selected even when the value for exposure compensa-

Sunlight focused into the camera when the sun is in or close to the

tion is 0. Users of the F5 and F4 can adjust exposure compensa-

frame could cause a ﬁ re.

tion using Custom Setting 18 or the focusing screen exposure

- If the lens will not be used for an extended period, attach the front and

compensation dial, respectively; see the camera manual for de-

rear lens caps and store the lens out of direct sunlight. If left in direct

tails.

sunlight, the lens could focus the sun's rays onto ﬂ ammable objects,

Empty cell: Not suited to use with this lens. Note that type M screens can

causing ﬁ re.

however be used for photomicrography and macro photogra-

■ ■

Parts of the Lens

phy at magniﬁ cations of 1 : 1 or higher.

q Meter coupling ridge

!1 EE servo coupling post

■ ■

Depth of Field

w CPU contacts

!2 Minimum aperture lock lever

The depth-of-fi eld indicators on either side of the focus distance

e Aperture indexing post

!3 Lens barrel

mark show the approximate depth of fi eld (or in other words, the

r Aperture scale

!4 A-M mode index

extent of the area in which objects behind or in front of the subject

t Aperture–direct-readout scale

!5 Focus ring

appear to be in focus). Note that the indicators do not provide ac-

y Aperture ring

!6 A-M mode ring

curate information at short focus distances; to determine depth of

u Aperture/mounting index

!7 Reproduction ratio indicator

fi eld, refer to the depth of fi eld table. If the camera off ers depth-of-

i Focus limit switch

!8 Focus distance indicator

o Focus distance indicator window

!9 Depth-of-fi eld indicators

fi eld preview (stop down), depth of fi eld can also be previewed in

!0 A-M mode ring release button

@0 Focus distance mark

the viewfi nder.

■ ■

The Minimum Aperture Lock Lever (Figure A)

■ ■

Notices

Lock aperture at f/32 when shooting in programmed auto or shut-

• Keep the CPU lens contacts clean and be careful not damage the CPU

ter-priority auto mode.

contacts.

Rotate the aperture ring to the minimum aperture setting

• Do not attach the following accessories directly to the lens: PK-1 or PK-

(f/32).

11 auto extension rings, BR-4 or BR-2 auto rings, or K1 or K2 rings (the

PK-11A and BR-2A can be used in place of the PK-11 and BR-2, respec-

Slide the lock lever toward the aperture ring so that the white

tively). Failure to observe this precaution will result in damage to the

dot on the lock lever aligns with the orange dot.

CPU contacts or other parts of the lens. Other lens accessories may not

To release the lock, slide the lever in the opposite direction.

be compatible with the camera; be sure to consult the camera manual

Close ups and Reproduction Work

■ ■

before use.

To prevent blur caused by camera shake, mount the camera on a

• On some cameras, the lens can not be mounted with aperture locked at

tripod and use a cable release or remote cord. Close ups are gen-

the minimum value. Be sure to release the aperture lock before attaching

erally associated with extremely shallow fi eld depths; for greater

the lens. See "The Minimum Aperture Lock Lever" for details.

depths of fi eld, stop down the lens, choose longer exposure times,

• The lens can not be used with the DX-1 viewﬁ nder for Nikon F3AF cam-

and position the camera so that the focal plane is parallel to the

eras.

portion of the subject you wish to photograph. See the following

■ ■

Focus

table for information on metering exposure with the lens oriented

This lens supports A-M mode selection. To choose the A-M mode,

normally (use stop-down metering when the lens reversed), but

rotate the A-M mode ring while pressing the A-M mode ring re-

note that the exposure metering system for the F-401s/N4004s

lease button. Select A for autofocus and M for manual focus. Au-

does not function with bellows or with the PK-11A, PK-12, or PK-13.

tofocus is not supported with close-up attachment lenses; select

Camera

Accessory

M when using a close-up attachment lens. Note that selecting M

F90X, N90s

, F90-Series/N90

PK-11A,12,13/PN-11/

when the lens is mounted on a Nikon N2020 (sold in the U. S. A.

F70-Series/N70

, F50-Series/N50

TC-201 /TC-14A

and Canada only) or F-501 may cause the camera to malfunction.

F4 series, F-801/N8008

PK-2, 3/PN-1/Bellows Stop-down

■ ■

The Focus Limit Switch

F-801s/N8008s

(CPU- AI)

For faster focusing, slide the focus limit switch from FULL to LIMIT. At

F3 series, FE, FM, EL2,

PK-11A, 12, 13/PN-

short focus distances, selecting LIMIT will restrict focus to distances

Nikkormat FT3, F2 Photomic A,

11/TC-201/TC-14A

in the vicinity of 0.3 m to 0.219 m (1 ft. to 0.72 ft.), while selecting

F2 Photomic AS (AI)

LIMIT at longer focus distances will restrict focus to positions be-

PK-2, 3/PN-1/Bellows Stop-down

tween approximately 0.3 m (1 ft.) and ∞.

PK-11A,12,13/PN-11/

F-501/N2020

, FE2, FA, FM2, FG,

■ ■

Reproduction Ratio

TC-201/TC-14A

FG-20, EM, F-301/N2000

(AI)

The reproduction ratio is the ratio of the apparent size of an object

PK-2, 3/PN-1/Bellows Stop-down

to its true size. If, for example, the image on the fi lm (image sensor)

PK-11A,12, 13/PN-

is one-fi fth of actual size, the reproduction ratio is 1: 5. If desired,

the reproduction ratio can be selected using the reproduction ratio

11/TC-201/TC-14A/

indicator. To shoot at a reproduction ratio of 1: 5, for example, se-

Non-AI

Bellows

lect manual focus and rotate the focus ring until the focus distance

PK-2, 3/PN-1

mark aligns with the number "5" in the reproduction ratio indicator,

then move the camera forward or back until the subject is in focus.

1. See camera manual for instructions.

The "Close-up Photography" table shows the reproduction ratios

2. Lens modiﬁ cation required. After attaching modiﬁ ed lens, perform

for diff erent focus distances.

maximum aperture indexing manually.

3. Sold in U. S. A. only.

4. Sold in U.S. A. and Canada only.

■ ■

Exposure Compensation

■ ■

Speciﬁ cations

Extending macro and other close-up lenses for higher reproduc-

Mount

tion ratios decreases the amount of light reaching the fi lm (or im-

Focal length

age sensor), changing the eff ective f-number (see "Exposure Factor",

Maximum aperture

below). While through-the-lens (TTL) metering and fl ash control

Lens construction

automatically compensate for this drop in brightness by adjusting

Angle of view

exposure, fl ash level, and the exposure indicator according to the

Distance information

amount of light actually passing through the lens, exposure and

E E

G1 G1 G2 G2 G3 G3 G4 G4 H1 H1

Minimum aperture lock

Minimum aperture lock Provided

fl ash levels set using external exposure meters must be adjusted

manually with reference to the exposure factor. For example, if the

Focus distance indicator

Focus distance indicator Graduated in meters and feet from 0.219 m

shutter speed read from an external exposure meter is 1⁄8 s, the drop

(+1.0)

in illumination at a reproduction ratio of 1 : 1 can be compensated

Minimum focus distance 0.219 m (0.72 ft) from focal plane at all zoom

Minimum focus distance

for by slowing shutter speed by one stop to ¼ s and increasing

(+0.5)

aperture by 2⁄3 EV, or by slowing shutter speed by two stops to ½ s

Reproduction ratio

and increasing aperture by 1⁄3 EV.

indicator

Aperture scale

■ ■

Exposure Factor

The lens f-number indicates the brightness of the subject at a focus

Diaphragm

distance of infi nity; higher reproduction ratios result in reduced im-

Aperture range

K K

P P M M R R

T T

U U

F F

age brightness. The actual brightness is referred to as the "eff ective

f-number", and the amount that exposure compensation has to be

Metering

raised to account for the loss in brightness as the "exposure factor".

Although the eff ective aperture of this lens changes with focal

Filter-attachment size

length (reproduction ratio), the aperture shown in the camera

Dimensions

viewfi nder or control panel is automatically adjusted to take this

into account, with the result that the exposure factor can be ig-

nored if you reference these displays when setting aperture to the

Weight

value reported by an external exposure meter. The aperture dials for

Nikon reserves the right to change the speciﬁ cations of the hardware de-

cameras in the F-401 series also automatically adjust for the expo-

scribed in this manual at any time and without prior notice.

sure factor; manual compensation is not required. This adjustment

is not however performed by the lens aperture ring or the aperture

displays for the F5 and other cameras with a viewfi nder aperture

window, and consequently you must take the exposure factor into

account when using these displays. The following table shows the

exposure factors and the amount by which aperture must be in-

creased at reproduction ratios above 1 : 10. Changes to aperture

can be kept to a minimum by also adjusting shutter speed.

Aperture shown in camera control

Increase

panel (eff ective aperture)

Reproduction

Exposure

aperture

ratio

factor

by by

Max. (f/2.8) f/8 f/8 f/16

Max. (f/2.8)

f/16 Min. (f/32)

Min. (f/32)

1 : 10

1.15

1/6 EV

3.2

1 : 7

1.23

1/3 EV

3.2

1 : 5

1.32

1/3 EV

3.2

1 : 4

1.41

1/2 EV

3.2

1 : 3

1.57

2/3 EV

3.5

1 : 2.5

1.71

2/3 EV

3.5

1 : 2

1.92

1 EV

1 : 1.8

2.04

1 EV

1 : 1.6

2.21

1+1/6 EV

4.2

1 : 1.4

2.42

1+1/3 EV

4.2

1 : 1.3

2.57

1+1/3 EV

4.5

1 : 1.2

2.73

1+1/2 EV

4.5

1 : 1.1

2.94

1+1/2 EV

4.8

1 : 1

3.20

1+2/3 EV

Lens Care

■ ■

• Use a blower to remove dust and lint from the lens surfaces. To remove

smudges and ﬁ ngerprints, apply a small amount of ethanol or lens

cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean

from the center outwards using a circular motion, taking care not to

leave smears or touch the glass with your ﬁ ngers.

• The use of ether may cause smudges to develop on multi-coated lenses.

Such smudges can be removed by cleaning the lens again using a cot-

ton cloth dampened with a small amount of ethanol.

• Never use organic solvents such as paint thinner or benzene to clean

the lens.

• A lens hood or NC ﬁ lter can be used to protect the front lens element.

• Attach the front and rear caps when the lens is not in use.

• Keep the lens dry. Rusting of the internal mechanism can cause irrepa-

rable damage.

• If the lens will not be used for an extended period, store it in a cool, dry

location to prevent mold and rust. Do not store in direct sunlight or with

naphtha or camphor moth balls.

Metering

• Leaving the lens in extremely hot locations could damage or warp parts

made from reinforced plastic.

Full-aperture

■ ■

Compatible Accessories

• 62 mm screw-on ﬁ lters

• 62 mm screw-on Lens Hood HN-22

• Soft Case CL-0815

Full-aperture

(or light inten-

sity feedback)

Stop-down

Full-aperture

Aperture Range at a Focus Distance of ∞

Maximum

1 stop 2 stops 3 stops 4 stops 5 stops 6 stops 7 stops

aperture

Focused distance

Figure A

Minimum focus distance

Aperture range at minimum focus distance

■ ■

Depth of Field (Metric)

F mount

60 mm

f/2.8

Focus distance

f/2.8

f/4 f/4

f/5.6

8 elements in 7 groups

39° 40

0.219

0.219 - 0.219 0.218 - 0.219 0.218 - 0.219 0.218 - 0.219 0.218 - 0.219 0.218 - 0.219 0.218 - 0.219 0.218 - 0.219

Output to camera

0.220 - 0.220 0.219 - 0.220 0.219 - 0.220 0.219 - 0.220 0.219 - 0.220 0.219 - 0.220 0.219 - 0.220 0.219 - 0.220

0.22

0.225

0.225 - 0.225 0.225 - 0.225 0.225 - 0.225 0.225 - 0.225 0.225 - 0.225 0.225 - 0.225 0.224 - 0.225 0.224 - 0.225

(8 ¾ in.) to inﬁ nity (∞)

0.23

0.230 - 0.230 0.230 - 0.230 0.230 - 0.230 0.229 - 0.230 0.229 - 0.230 0.229 - 0.230 0.229 - 0.230 0.229 - 0.230

0.235

0.235 - 0.235 0.235 - 0.235 0.234 - 0.235 0.234 - 0.235 0.234 - 0.235 0.234 - 0.235 0.234 - 0.235 0.234 - 0.235

positions

0.24

0.239 - 0.240 0.239 - 0.240 0.239 - 0.240 0.239 - 0.240 0.239 - 0.240 0.239 - 0.240 0.239 - 0.240 0.239 - 0.240

1 : 10 to 1 : 1 (life size)

0.25

0.249 - 0.250 0.249 - 0.250 0.249 - 0.250 0.249 - 0.250 0.249 - 0.250 0.249 - 0.250 0.248 - 0.251 0.248 - 0.251

f/2.8–f/32 on both standard and aperture-di-

rect-readout scales

0.27

0.269 - 0.270 0.269 - 0.270 0.269 - 0.270 0.269 - 0.270 0.269 - 0.271 0.268 - 0.271 0.267 - 0.272 0.267 - 0.273

Fully automatic

0.30

0.299 - 0.300 0.299 - 0.300 0.299 - 0.301 0.298 - 0.301 0.298 - 0.302 0.297 - 0.302 0.296 - 0.304 0.294 - 0.305

f/2.8 – 32

• CPU/AI cameras: Full aperture

0.35

0.349 - 0.351 0.349 - 0.351 0.348 - 0.352 0.347 - 0.352 0.346 - 0.354 0.344 - 0.355 0.342 - 0.358 0.339 - 0.361

• Other cameras: Minimum aperture

0.40

0.398 - 0.401 0.397 - 0.402 0.396 - 0.403 0.395 - 0.404 0.393 - 0.406 0.391 - 0.409 0.387 - 0.413 0.382 - 0.419

62 mm (P = 0.75 mm)

0.50

0.496 - 0.503 0.495 - 0.504 0.493 - 0.506 0.491 - 0.509 0.487 - 0.513 0.487 - 0.519 0.475 - 0.528 0.466 - 0.541

Approx. 70 mm maximum diameter × 74.5 mm

(distance from camera lens mount fl ange); overall length

0.70

0.692 - 0.708 0.688 - 0.711 0.684 - 0.716 0.677 - 0.724 0.669 - 0.734 0.657 - 0.750 0.641 - 0.773 0.620 - 0.809

82.8 mm

1 1

0.981 - 1.020 0.973 - 1.029 0.963 - 1.041 0.948 - 1.059 0.929 - 1.085 0.903 - 1.126 0.868 - 1.189 0.825 - 1.293

Approx. 440 g (15.5 oz)

1.914 - 2.096 1.880 - 2.138 1.835 - 2.202 1.774 - 2.298 1.696 - 2.421 1.597 - 2.709 1.477 - 3.189 1.336 - 3.281

2 2

∞ ∞

38.3 – ∞

27.1 – ∞

19.2 – ∞

19.5 – ∞

■ ■

Depth of Field (Imperial)

Focus distance

f/2.8

f/4 f/4

f/5.6

8 ⁄ in. –

8 ¾ in.

8 ⁄ in.

9 in. –

9 in.

8 ⁄ in.

9 ⁄ in. –

9 ¼ in.

9 ⁄ in.

9 ⁄ in. –

9 ½ in.

9 ⁄ in.

10 in. –

10 in.

9 ⁄ in.

1 ft –

1 ft

11 ⁄ in.

1 ft 3 in. –

1 ft 3 ⁄ in. –

1 ft 3 ⁄ in. –

1 ¼ ft

1 ft 2 ⁄ in.

1 ft 2 ⁄ in.

1 ft 2 ⁄ in.

1 ft 6 ⁄ in. –

1 ft 6 ⁄ in. –

1 ft 6 ⁄ in. –

1 ft 6 ⁄ in. –

1 ½ ft

1 ft 2 ⁄ in.

1 ft 2 ⁄ in.

1 ft 5 ⁄ in.

1 ft 5 ⁄ in.

2 ft ⁄ in. –

2 ft ⁄ in. –

2 ft ⁄ in. –

2 ft ⁄ in. –

2 ft

1 ft 11 ⁄ in.

1 ft 11 ⁄ in.

1 ft 11 ⁄ in.

3 ft ⁄ in. –

3 ft ⁄ in. –

3 ft 1 ⁄ in. –

3 ft 1 ⁄ in. –

3 ft

2 ft 11 ⁄ in.

2 ft 11 ⁄ in.

2 ft 10 ⁄ in.

2 ft 10 ⁄ in.

7 ft 4 ⁄ in. –

7 ft 6 ⁄ in. –

7 ft 8 ⁄ in. –

8 ft 1 ⁄ in. –

7 ft

6 ft 7 ⁄ in.

6 ft 6 ⁄ in.

6 ft 4 ⁄ in.

6 ft 1 ⁄ in.

125 ft – ∞

88 ft – ∞

63 ft – ∞

44 ft – ∞

∞ ∞

Camera display at ∞

Camera display at minimum focus distance

Note: Maximum aperture varies with size of exposure increment selected

with camera. The fi gure assumes exposure increment of 1⁄3 EV.

■ ■

Close-up Photography (Metric)

(m)

Depth of fi eld

Reproduction ratio

Accessory

f/8 f/8

f/11

f/16

f/22

f/32

0.1

No. 5T close-up attachment lens

1/1.1

No. 6T close-up attachment lens

1/1.3

No. 5T with No. 6T close-up attachment lens

1/1.4

PK-series Rings

3 3

1/1.5

PN-Ring

1/1.7

PB-4 or PB-5 bellows attachment

1/1.9

PB-6 bellows attachment

1/2.3

PS-4 or PS-5 slide copying adapter

1/2.8

PS-6 slide copying adapter

1/3.7

PB-6M macro copying stand

1/4.6

PB-6E extension bellows

1/6.3

PF-2, PF-3, or PF-4 repro copy outfi t

1/9.7

1. When lens is reversed, PB-6, PB-6E, PB-6M, and PS-6 require optional BR-5 adapter ring, other attachments optional BR-2A adapter ring.

1/14.7

2. Not recommended; results in close up photographs with poor deﬁ nition.

1/31.4

3. First ﬁ gure is for PK-11A when used alone, remaining ﬁ gures for rings PK-11A through PK-13, PK-11 through PK-13, or PK-1 through PK-3 used together.

Note the PK-11 and PK-1 can not be attached directly to the lens.

9.6 – ∞

9.8 – ∞

4.9 – ∞

3.5 – ∞

1/∞

4. BR-3 or BR-6 macro ring adapter require when lens is reversed.

5. The ﬁ gures for the PF-2, PF-3, and PF-4 repro copy outﬁ ts are for a subject positioned on the base plate when the lens is used without close-up attach-

ments. A reproduction ratio of 1 : 1 can be obtained by setting the coarse focus control to minimum and lowering ﬁ ne focus by about 45 mm.

(ft)

■ ■

Close-up Photography (Imperial)

Depth of fi eld

Reproduction ratio

f/8 f/8

f/11

f/16

f/22

f/32

8 ⁄ in. –

1/1.2

Accessory

8 ⁄ in.

9 in. –

1/1.4

No. 5T close-up attachment lens

8 ⁄ in.

No. 6T close-up attachment lens

9 ⁄ in. –

1/1.5

9 ⁄ in.

No. 5T with No. 6T close-up attachment lens

9 ⁄ in. –

PK-series Rings

3 3

1/1.7

9 ⁄ in.

PN-Ring

10 in. –

10 ⁄ in. –

1/2.0

PB-4 or PB-5 bellows attachment

9 ⁄ in.

9 ⁄ in.

PB-6 bellows attachment

1 ft ⁄ in.–

1 ft ⁄ in.–

1 ft ⁄ in.–

1/2.9

11 ⁄ in.

11 ⁄ in.

11 ⁄ in.

PS-4 or PS-5 slide copying adapter

1 ft 3 ⁄ in. –

1 ft 3 ⁄ in. –

1 ft 3 ⁄ in. –

1 ft 3 ⁄ in. –

PS-6 slide copying adapter

1/4.3

1 ft 2 ⁄ in.

1 ft 2 ⁄ in.

1 ft 2 ⁄ in.

1 ft 2 ⁄ in.

PB-6M macro copying stand

1 ft 6 ⁄ in. –

1 ft 6 ⁄ in. –

1 ft 6 ⁄ in. –

1 ft 7 ⁄ in. –

1/5.6

PB-6E extension bellows

1 ft 5 ⁄ in.

1 ft 5 ⁄ in.

1 ft 5 ⁄ in.

1 ft 4 ⁄ in.

PF-2, PF-3, or PF-4 repro copy outfi t

2 ft ⁄ in. –

2 ft 1 ⁄ in. –

2 ft 1 ⁄ in. –

2 ft 2 ⁄ in. –

1/8.2

1 ft 11 ⁄ in.

1 ft 10 ⁄ in.

1 ft 9 ⁄ in.

1. When lens is reversed, PB-6, PB-6E, PB-6M, and PS-6 require optional BR-5 adapter ring, other attachments optional BR-2A adapter ring.

2. Not recommended; results in close up photographs with poor deﬁ nition.

3 ft 2 ⁄ in. –

3 ft 3 ⁄ in. –

3 ft 5 ⁄ in. –

3 ft 9 in. –

1/13.3

3. First ﬁ gure is for PK-11A when used alone, remaining ﬁ gures for rings PK-11A through PK-13, PK-11 through PK-13, or PK-1 through PK-3 used together.

2 ft 9 ⁄ in.

2 ft 8 ⁄ in.

2 ft 7 ⁄ in.

2 ft 6 ⁄ in.

Note the PK-11 and PK-1 can not be attached directly to the lens.

8 ft 8 ⁄ in. –

9 ft 8 ⁄ in. –

11 ft 7 ⁄ in. –

16 ft 4 in. –

4. BR-3 or BR-6 macro ring adapter require when lens is reversed.

1/33.6

5 ft 10 ⁄ in.

5 ft 5 ⁄ in.

5 ft ⁄ in.

4 ft 6 ⁄ in.

5. The ﬁ gures for the PF-2, PF-3, and PF-4 repro copy outﬁ ts are for a subject positioned on the base plate when the lens is used without close-up attach-

ments. A reproduction ratio of 1 : 1 can be obtained by setting the coarse focus control to minimum and lowering ﬁ ne focus by about 45 mm.

31 ft – ∞

22 ft – ∞

16 ft – ∞

11 ft – ∞

1/∞

(cm)

Close-up photography

Close-up photography (lens reversed)

1 1

Reproduction

Focus

Reproduction

Focus

Subject fi eld

ratio

distance

ratio

distance

1/11 – 1.1 26.6 × 39.9 – 2.16 × 3.25 79.1 – 21.5

–

1/5.7 – 1.2 13.6 × 20.5 – 1.98 × 2.98 46.7 – 21.0

–

2 2

1/3.8 – 1.3

9.1 × 13.6 – 1.84 × 2.76 35.9 – 20.9

–

1/7.5 – 2.1

18.0 × 27.0 – 1.2 × 1.7

58.5 – 24.6

–

1/1.1 – 2.1

2.7 × 4.1 – 1.1 × 1.7

24.8 – 24.9

–

1/1.4 – 3.1

3.3 × 5.0 – 0.78 × 1.2

25.3 – 33.1

1.7 – 4.0

1.5 × 2.2 – 0.60 × 0.90

26.2 – 38.3

1/1.3 – 3.5 300 × 4.50 – 0.69 × 1.04 24.95 – 35.18

1.4 – 2.9

1.70 × 2.55 – 0.83 × 1.24 25.37 – 32.61

4 4

1/1.4 – 1.8

3.3 × 5.0 – 1.4 × 2.0

25.3 – 26.6

1.7 – 3.8

1.5 × 22 – 0.62 × 0.94

26.2 – 37.3

1/1.3 – 1.8 300 × 4.50 – 1.37 × 2.05 24.96 – 26.60

1.4 – 1.8

1.70 × 2.55 – 1.37 × 2.05 25.37 – 26.60

1/1.3 – 1.8 30.0 × 4.50 – 0.33 × 0.49 24.95 – 26.90

1.4 – 1.8

1.7 × 2.55 – 1.31 × 1.97 25.37 – 26.90

1/1.3 – 7.3 3.00 × 4.50 – 0.33 × 0.49 24.95 – 57.27

1.4 – 6.7

1.70 × 2.55 – 0.36 × 0.54 25.37 – 53.99

5 5

1/12.0 – 1.0

28.9 × 43.3 – 2.4 × 3.6

85.3 – 21.6

–

(in.)

Close-up photography

Close-up photography (lens reversed)

1 1

Reproduction

Focus

Reproduction

Focus

Subject fi eld

ratio

distance

ratio

distance

1/11 – 1.1 10.5 × 15.7 – 0.85 × 1.28 31.1 – 8.5

–

1/5.7 – 1.2

5.4 × 8.1 – 0.78 × 1.17

18.4 – 8.3

–

2 2

1/3.8 – 1.3

3.6 × 5.4 – 0.73 × 1.09

14.1 – 8.2

–

1/7.5 – 2.1

7.1 × 10.6 – 0.46 × 0.68

23.0 – 9.7

–

1/1.1 – 2.1

1.1 × 1.6 – 0.44 × 0.67

9.7 – 9.8

–

1/1.4 – 3.1

1.3 × 2.0 – 0.31 × 0.46

10.0 – 13.0

1.7 – 4.0

0.57 × 0.86 – 0.24 × 0.35 10.3 – 15.1

1/1.3 – 3.5 1.18 × 1.77 – 0.27 × 0.41 9.82 – 13.85

1.4 – 2.9

0.67 × 1.01 – 0.32 × 0.49 9.99 – 12.66

4 4

1/1.4 – 1.8

1.3 × 2.0 – 0.54 × 0.81

10.0 – 10.5

1.7 – 3.8

0.57 × 0.86 – 0.25 × 0.37 10.3 – 14.7

1/1.3 – 1.8 1.18 × 1.77 – 0.54 × 0.81 9.82 – 10.47

1.4 – 1.8

0.67 × 1.01 – 0.54 × 0.81 9.99 – 10.47

1/1.3 – 1.8 1.18 × 1.77 – 0.52 × 0.78 9.82 – 10.59

1.4 – 1.8

0.67 × 1.01 – 0.52 × 0.78 9.99 – 10.59

1/1.3 – 7.3 1.18 × 1.77 – 0.13× 0.19 9.82 – 22.55

1.4 – 6.7

0.67 × 1.01 – 0.14 × 0.21 9.99 – 21.26

5 5

1/12.0 – 1.0 1.14 × 1.70 – 0.94 × 1.42 33.6 – 8.6

–