Nikon eclipse e100 Anleitung Handbuch - Seite 37

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Nikon eclipse e100 herunter. Nikon eclipse e100 44 Seiten.

Seite drucken

Troubleshooting Tables

If difficulties should be encountered in the course of operation, please recheck the symptoms,

referring to the tables below, before contacting your nearest Nikon representative.

Optical

Troubles

Darkness at the periphery,

no viewfield seen, or

uneven viewfield

brightness.

Dirt or dust in the

viewfield.

Causes

Revolving nosepiece not in

click-stop position (objective

not centered in the optical

path).

Condenser position too low.

Condenser not installed

correctly.

Field lens unit not installed

correctly.

Lamp not installed correctly.

Dirt or dust on the lens

(condenser, objective, field

lens, eyepiece, specimen).

Optical-path selection lever in

the intermediate position (on

trinocular eyepiece tube).

Optical-path selection lever not

set to binocular 100%.

Condenser position too low or

too high.

Aperture diaphragm closed too

far.

Dirt or dust on the lens

(condenser, objective, field

lens, eyepiece, specimen).

Corrective Measures

Revolve to click-stop position

(swing the objective correctly

into the optical path).

Position the condenser slightly

lower than the upper limit.

(P. 19)

Install correctly. (P. 28)

Install correctly. (P. 31)

Clean the lens. (P. 40)

Properly set to binocular 100%.

(P. 24)

Position the condenser slightly

lower than the upper limit.

(P. 19)

Open properly. (P. 20)

Clean the lens. (P. 40)