Nikon Multizoom AZ100 Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Mikroskop Nikon Multizoom AZ100 herunter. Nikon Multizoom AZ100 27 Seiten. Multi-purpose zoom microscope
Auch für Nikon Multizoom AZ100: Technisches Handbuch (45 seiten)
Seite drucken
1
Part Names
The Nikon MULTI PURPOSE ZOOM MICROSCOPE MULTIZOOM AZ100 is the macro/mono zoom
microscope that is suitable for observation or photomicrography in the range from macro to medium
magnification. The microscope can use five types of objectives: 0.5x, 1x, 2x, 4x, and 5x objectives. The
product can zoom in or out in the magnification range of 1x to 8x for each objective. (The total magnification
range is 0.5x to 40x.)
Eyepiece
(AZ-W10X)
Diopter adjustment ring
Coaxial episcopic illuminator
(AZ-ICI)
Zoom knobs
Zoom body
(AZ100)
Aperture diaphragm
open/close dial
Objective
EPI stage
(AZ-STGE)
Light guide fiber
(provided with the AZ-ICI)
Fiber Illuminator
(C-FI115D / C-FI115 / C-FI230)
Stage height adjustment knob
(coarse and fine knobs, both sides)
Configuration example: The above figure shows the configuration example of the following parts:
AZ-TE80 Ergonomic Trinocular Tube 80, AZ-W10X Eyepiece 10X, AZ100 Zoom Body,
AZ-FM AZ (Focusing Mount) Adaptor, objectives, AZ-NP3 Triple Nosepiece, AZ-STE Episcopic Stand,
AZ-STGE EPI Stage, AZ-ICI Coaxial Episcopic Illuminator (with a light guide fiber), and the
C-FI115D/C-FI115/C-FI230 Fiber Illuminator.
Use of the illuminator
To perform the microscopy, a specimen must be illuminated with a light source or an illuminator.
•
AZ-LED LED Ring Illuminator: This light source is attached to the tip of the objective.
•
AZ-ICI Coaxial Episcopic Illuminator: This illuminator is used for the episcopic illumination. It is
attached to the portion between the zoom body and the eyepiece tube with the Fiber Illuminator as a light
source. (Refer to the figure shown above.)
•
AZ-STD Diascopic Stand and AZ-STGD DIA Stage: The stand and the stage are used for the diascopic
illumination with the Fiber Illuminator as a light source.
•
AZ-FL Epi-Fluorescence Attachment: This illuminator is used for the epi-fl microscopy. It is attached in
place of the focus mounting adapter and requires a mercury lamp light source.
Binocular part
(both sides)
(lens barrel)
Vertical tube
5
Ergonomic trinocular tube
(AZ-TE80 / AZ-TE100)
Optical path selector lever
Focusing mount adapter
(AZ-FM)
Elevating section
CLICK ON/OFF lever
Slider slot
Focus knobs
(coarse and fine knobs,
both sides)
Triple nosepiece /
Single nosepiece
(AZ-NP3 / AZ-NPS)
EPI stand
(AZ-STE)
Coarse movement lever
Coarse / fine movement
selector switch
Stage movement knob
(X direction / Y direction)