Nikon SC Anleitung Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Nikon SC herunter. Nikon SC 16 Seiten.

III. OBSERVATION

Setting the specimen in position

1) Place the specimen on the stage holding in

position by means of the slide holder.

{Fig. 15)

2) When not using the mechanical stage, hold

the specimen securely with the two stage

clips. (Fig. 16)

Adjusting the illumination

1) Insert the power cord into the socket.

2) Raise the condenser to its upper limit, and

fully open the condenser diaphragm.

3) Turn the power switch & brightness control

dial to light the lamp, (Fig. 17)

Brightness is increased by turning toward the

thicker end of the arrow, and decreased to¬

ward the thinner.

4) Rotate the revolving nosepiece to swing the

4X or 10X objective into the optical path.

At this time, make sure that the objective

clicks properly into position,

Adjusting interpupillary distance (Fig. 18)

When using a binocular eyepiece tube, adjust

the interpupillary distance, so that both the

right and left viewfields become one.

Adjusting for eyesight difference (Fig. 19)

1) First, viewing into the right eyepiece with

the lOX objective in position, manipulate

the coarse and fine focus knobs to bring the

specimen into focus.

2} Then, viewing into the left eyepiece, turn

the diopter ring to bring the image into

sharp focus, without manipulating the focus

knobs.

index is put on the diopter ring.

Stage clips

Fig. 16