Nikon Nivo 3.C Gebrauchsanweisung - Seite 29

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Messgeräte Nikon Nivo 3.C herunter. Nikon Nivo 3.C 32 Seiten. Hardware

Setting the Measurement Mode and Preparing the Target

The Nivo series has two measurement modes: Prism mode (

Reflectorless mode (

down the

To set the measurement mode depending on the target you want to measure, see the

following table.

Target

Prism, reflector sheet

Other (reflective materials)

In some cases, you can measure another target that is not appropriate to the set

measurement mode.

Note – The Nivo

function, and Laser Class 1 in the Prism mode.

Don

t sight the Prism when the Laser Pointer is on.

Note – Nivo

and Laser Class 2 in Laser pointer function.

Do not use a prism with scratches, a dirty surface, or a chipped center. Prisms with

thin edges are recommended.

✓

As the Nivo series is extremely sensitive, multiple reflections on the prism surface

can sometimes cause a significant loss in accuracy.

To maintain the accuracy of your measurements:

N-Prism

[MSR1]

[MSR2]

key for one second.

2.C

is Laser Class 3R in the Reflectorless mode and Laser pointer

3.C

5.C

and Nivo

are Laser Class 1 in the Prism and Reflectorless mode,

chipped center

thin edges

). These modes can be changed at any time by holding

Target setting

Prism (Prism mode)

N-Prism (Reflectorless mode)

thick edges

Total Station Nivo Series Instruction Manual

Preparation 2

Prism

) and

1 7