Cub VS-95A043 Benutzerhandbuch & Installationshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch & Installationshandbuch für Automobilelektronik Cub VS-95A043 herunter. Cub VS-95A043 16 Seiten. Blind spot detection system for passenger cars
Seite drucken
If the connector is
dislocated, please
replace the connector
to its original position.
Connect the connector
and terminal tightly.
RF Standard
(1)
NCC low-power radio waves radiated device management methods：
Article 12:
Companies, stores, or users are prohibited from changing
the frequency, increasing the power, or modifying the
characteristics and functions of the original design of the
certified low-power radio waves radiated device without
permission.
Article 14:
The use of low-power RF devices must not affect the
safety of aviation and interfere with legal communications.
If any interference occurs, they should be stopped
immediately and improved to the extent of no interference
before users can use the legal communications mentioned
in the previous paragraph, i.e., radio communications
under the provisions of the Telecommunications Act. Low-
power RF devices must endure interference from legal
communications or industrial, scientific, and medical radio
wave-radiated electrical equipment.
(2)
FCC regulations：
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including
interference that may cause undesired operation.
Please do not pull the
connector apart by
pulling the harness.
Cut off the excessive
length of the cable tie.
3
Please do not pull
the harness by force.