Dirtblaster NE445 Montageanleitung Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Schwimmbad-Staubsauger Dirtblaster NE445 herunter. Dirtblaster NE445 8 Seiten.
Seite druckenS T T
S
T E E
T
E P P
E
P 1 1
P
1
1
ATTACH THE SEAL
S S
To install the seal locate the word "UP". Face
it up towards the body of the cleaner. Gently
stretch the seal over the foot pad of the cleaner
until it sets itself into the groove as illustrated in
figure 2. Once in place the seal should rotate
and move freely.
NOTE
The seal is not reversible. It must be installed
with the flat side facing down towards the pool
liner and the pleated side facing upwards
towards the cleaner.
S T T
S
T E E
T
E P P
E
P
P 2 2
2
2
ATTACH THE DIVE
S S
FLOAT RESTRICTOR
The dive float restrictor is attached by sliding it
over the cleaner's body as shown in figure 3. It is
fastened by sliding it over the "U" shaped locking
clip on the body of the cleaner. Make sure the
locking tabs on both sides snap securely into
place.
NOTE
The dive float restrictor should be installed
with the float facing up.
S T T
S
T
T E E
E
E P P
P
P 3 3
3
3
ATTACH THE ROLLER
S S
BUMPER STRAP
Insert the bottom end of the strap into the
slots provided on the top and bottom of the
main body. Make sure that both ends snap in
securely.
Figure 2
Figure 3
Figure 4
3