Dirty Hand Tools 103350 Betriebshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Pinne Dirty Hand Tools 103350 herunter. Dirty Hand Tools 103350 16 Seiten. 10” mini-cultivator

Seite drucken

UPPER

HANDLEBARS

LOWER

HANDLEBARS

CARRIAGE

BOLT

ADJUSTMENT

KNOB

HEX NUT

WASHER

HEX BOLT

Unpacking

Adjusting the Handlebars

Open top of carton and remove the cultivator and the upper and

lower handlebars which are packed separately. Attach the lower

handle bars to the handlebar support on the cultivator with two

adjustment knobs.

with two adjustment knobs. Note that the knobs attach on the

inside with carriage bolts threaded through the square holes on the

outside of the handlebars (see Figure 1).

Wheel/Depth Regulator Assembly

Attach the wheels and depth regulator with hex bolt, spacer, washer

and hex nut (see Figure 2).

Adjusting the Wheel Height

Remove the locking pin and slide the depth regulator up or down,

position at desired height and reinstall the locking pin (see Figure 2).

SPACER

en attach the upper to the lower handlebars

ADJUSTMENT

KNOB

HANDLEBAR

SUPPORT

Figure 1

LOCKING

Figure 2

ADJUSTMENT

KNOB

CARRIAGE

BOLT

DEPTH

REGULATOR