Disc Makers ElitePro Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Disc-Duplikator Disc Makers ElitePro herunter. Disc Makers ElitePro 13 Seiten. Elite series

Seite drucken

ElitePRO Getting Started Guide

Powering on the equipment

With all cables securely connected and the monitor attached and powered on,

press the power switch on the back of the duplicator cabinet to the "1" posi-

tion.

Press the power switch on the left side of the cabinet once. The system fan

starts spinning, the green and amber activity lights illuminate on the face of the

cabinet, and the startup screen appears on the monitor, as shown in the ﬁgure.

If the system does not start up as described or the initial screen shown does not

appear on the monitor, refer to the section in the Elite Series User Guide titled

Troubleshooting FAQ.

Operating the duplicator

To help you get started duplicating discs, this section guides you through the initial

use of FlexWare, setting up a copy operation with a built-in wizard, including the

printing of a disc label. First, place two blank discs on the input spindle. Then,

select a non-copy protected CD to use as a master in this procedure and place it

on top of the blank discs on the input spindle. We recommend using a master disc

with a minimal number of small ﬁles so that the test will run more quickly.

Before starting, be sure that you have completed the earlier procedures in this

guide for connecting the cables, setting up the printer, and powering up the dupli-

cator.

Starting FlexWare

When you ﬁrst power on the ElitePRO duplicator, the Windows startup screen

displays a small FlexWare shortcut icon in the upper left just below the My

Computer icon. Double click the FlexWare icon to start the program.

ElitePRO_Getting_Started_03.indd 6

2/20/06 4:40:06 PM