Disc Makers ReflexUltra Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Disc-Duplikator Disc Makers ReflexUltra herunter. Disc Makers ReflexUltra 2 Seiten. Dvd±r
Auch für Disc Makers ReflexUltra: Benutzerhandbuch (13 seiten), Schnellstart-Handbuch (2 seiten)
Seite drucken
DIRECT DISC TO DISC COPY
The Disc-to-Disc mode will duplicate the CD mas-
ter that is placed in the ReflexUltra's top drive –
also called the Source (Src) drive – to blank Ultra
CD-Rs that are loaded into the unit's remaining
drives. The ReflexUltra has been preset to dupli-
cate in the Hard Drive-to-Disc mode, but can easi-
ly be set to the Disc-to-Disc mode.
1 Power on the ReflexUltra by pressing the round
button at the bottom right on the front of the unit.
The system will initialize and perform a self-test,
which will be displayed on the LCD display area.
2 When the self-test is complete, the 1. Copy dis-
play will appear on the LCD screen. Press the
DOWN arrow until 8. Select Source appears on
the display screen.
3 Press the ENT button and the following image
will appear on the display screen:
SRC: HDD
00 IDE0 Master
4 Press the DOWN arrow once. Src: CD-RW 01
IDE1 Master will be displayed on the screen. Press
the ENT button and the LCD will display CD-RW
Selected. Press ENT again.
5 Press the UP arrow to return to 1. Copy. You
will notice that P: A is no longer displayed on this
screen. P: A is only displayed when copying in the
Hard Drive-to-Disc mode (see opposite side of
this guide).
6 To start the duplication process, load the top
drive with your CD master. Load the remaining
drives with the number of Ultra CD-Rs you wish to
duplicate.
7 Press the ENT button to begin duplicating. The
unit will automatically analyze the master disc (this
T
may take several seconds), and begin duplicating
at the maximum recording speed.
8 The LCD will display the copying progress. The
screen will display OK: when the duplication is
complete. Next to OK: will be the number of
successfully copied discs.
www.discmakers.com
Note: When the duplication process is completed, the
writer drives will automatically eject the CD-Rs that have
been duplicated successfully. The LCD screen will display
the number of copies that have PASSED. If any CD-Rs
have not been duplicated successfully, the LCD screen
will display the number of copies that have FAILED. The
CD-Rs that have not duplicated successfully will remain
in their drives until the eject button on the drive is
pressed. For information on why a CD-R might not copy
successfully, please see the User's Guide on the
attached CD.
1-888-800-4041