Disc Makers ReflexUltra Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Disc-Duplikator Disc Makers ReflexUltra herunter. Disc Makers ReflexUltra 13 Seiten. Dvd±r
Auch für Disc Makers ReflexUltra: Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten)
Seite drucken
Your ReflexUltra-7 has been optimized to work only with Disc Makers Ultra™
media. Ultra CD-Rs will burn faster with less rejects on the system's state-of-
the-art Plextor drives. That means you won't waste time or money on unsuc-
cessful burns. PLEASE NOTE THAT THE REFLEXULTRA CAN ONLY DUPLICATE
DISC MAKERS ULTRA CD-Rs. Other media cannot be duplicated in this system
and will be rejected.
GETTING STARTED
Carefully remove the ReflexUltra duplicator from its shipping container. Please
inspect the contents and verify them against the packing slip. Be sure to report
any errors in shipping immediately to Disc Makers.
Packing materials: Please save the original box and packaging in the event the
unit requires future service or you need to move the unit from one location to
another. This will help reduce the possibility of damage in transit.
Please Note: Any item that needs to be returned for a warranty repair must be
returned in original packaging. (See Page 2.)
I
S
NSTALLATION AND
ETUP
1. Unpack the ReflexUltra and place in a clean and cool work area. Keep the
external packaging for future storage and transportation.
2. Connect the power cord from the back of the unit to an electrical outlet. Do
not bypass the Ground.
3. The front panel should appear as below.
1-888-800-4041
M
C
ODES AND
M
ODES
The ReflexUltra is able to duplicate in two different modes: Hard-Drive-to-Disc
and disc to disc. The unit is factory preset to Hard-Drive-to-Disc. This mode is
efficient for duplicating large numbers of discs. The Hard-Drive-to-Disc copies
the master to the hard drive and then copies the data to each of the drives. This
ensures an exact copy of the original master to every disc.
The Disc-to-Disc mode will copy whatever is in the source Src drive to blank
media in the other drives in the unit. This mode is most effective for making
quantities of discs less than the number of drives in the unit. For the
ReflexUltra4, if the need is for three discs or less, use the Disc-to-Disc mode.
When you need to copy six discs or less, use the Disc-to-Disc mode.
Only slight changes will occur in the functions of the unit when the different
modes are chosen. When the unit is in the Hard Drive-to-Disc mode P: A will
appear at the right side of the first line of the LCD. P indicates the master disc
will be written to the hard drive, and the next letter indicates which partition
the file will be written to.
H
-D
-
-D
ARD
RIVE
TO
ISC
Upon powering up the ReflexUltra, the following should be displayed on the LCD
screen:
www.discmakers.com
OPYING
C
OPYING
1. Copy
P:A
T
05