Blade 300 CFX BNF Basic Gebrauchsanweisung - Seite 9
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Spielzeug Blade 300 CFX BNF Basic herunter. Blade 300 CFX BNF Basic 19 Seiten.
Seite drucken
AR7200BX Default Blade 300 CFX Setup
SETUP MENU Menu LED solid
Status-LED:
A
Mounting orientation
B
Swashplate servo—frequency
C
Tail servo—center position pulse length
D
Tail servo—frequency
E
Tail servo—rotor endpoints
F
Tail—sensor direction
G
Swashplate—servo centering
H
Swashplate—mixer
I
Swashplate—servo directions
J
Swashplate—cyclic pitch geometry
K
Collective pitch range
L
Swashplate—cyclic limit
M
Swashplate—sensor directions
N
Pirouette optimization direction
PARAMETER MENU Menu LED is fl ashing quickly
Status-LED:
Swashplate—
A
cyclic center adjustment
B
Control behavior
C
Swashplate—pitching up behavior
D
Tail—HeadingLock gain
E
Stick deadband
F
Tail—torque precompensation IX)
G
Cyclic response
H
Pitch boost
*The AR7200BX included with your Blade 300 CFX helicopter is pre-programmed with these default settings. If you perform a factory reset on the included
AR7200BX, it will default back to these helicopter settings.
To perform a Blade 300 CFX AR7200BX factory reset, enter any Setup menu and press the setup button for 10 seconds. After performing the factory reset,
you will need to re-center the swashplate servos by using setup menu G.
If you update the fi rmware on the AR7200BX to non-Blade 300 CFX fi rmware, all Blade 300 CFX helicopter default settings will be deleted. You will need
to complete the entire AR7200BX setup process before fl ying the helicopter again. Please refer to the Spektrum AR7200BX instruction manual included
with your helicopter for more information.
AR7200BX Parameter Menu Tips
Refer to the Spektrum AR7200BX manual to fi ne-tune the Blade 300 CFX to
your fl ying and control style via the AR7200BX parameter menu.
If you would like to change the control behavior of the fl ybarless system to
a pre-defi ned behavior in the AR7200BX, adjust parameter menu B (default
behavior is transmitter).
OFF
Purple
User defi ned
50Hz
User defi ned
960μs
User defi ned
50Hz
Tail stick—move to right endpoint and wait/left endpoint and wait
Reference
ELE center pos.
position
User defi ned
mechanical
nor|rev|rev
nor|nor|rev
Aileron stick–adjust 6° cyclic pitch on the roll axis (blades aligned with fuselage)
Collective stick on max and min position and use tail stick to adjust desired pitch
Stock settings provide +/- 12 degrees of collective pitch
Move aileron, elevator and pitch sticks – adjust max limits with tail stick
rev | rev
rev | nor*
OFF
Purple
Aileron and elevator stick – reset with tail stick
User defi ned
normal
User defi ned
very low
User defi ned
very low
User defi ned
1
User defi ned
off*
User defi ned
normal*
User defi ned
off*
If you would like to have the cyclic behavior to feel more linear OR more like
a fl ybarred helicopter, increase the cyclic response by adjusting parameter
menu G (default is 'slightly increased').
Refer to the Spektrum AR7200BX manual for specifi c details on each
parameter.
9
Red Flashing
Red Solid
upright
(vertical)
65Hz
120Hz
760μs
165Hz
270Hz*
default*
AIL center pos.
90°
120°*
nor|rev|nor
default
default*
Red Flashing
Red Solid
sport
pro
low
medium*
low
medium*
2
3*
low—nor
high—nor
slightly
increased
increased
low
medium
Firmware version 3103.0.0
Blue Flashing
Blue Solid
fl at (horizontal)*
165Hz
200Hz*
1520μs*
333Hz
560Hz
reversed
PIT center pos.
140°
140° (1=1)
default*
nor | nor
reversed
Blue Flashing
Blue Solid
extreme
transmitter*
high
very high
high
very high
4
5
low—rev
high—rev
high
very high
high
very high
EN