Armytek Predator Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Taschenlampe Armytek Predator herunter. Armytek Predator 2 Seiten.
Auch für Armytek Predator: Benutzerhandbuch (2 seiten)

Seite drucken

1. Always follow the instructions from this manual and recommendations on battery usage.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

4. Do not use different power sources together, i.e. old ones with new ones, charged with

discharged. Do not use different types of batteries combined as the element with less

capacity can be damaged.

5. Do not modify or recast the flashlight and its components as it will deprive you of the

warranty.

6. Do not allow water or any other liquid to leak into the flashlight.

7. Do not aim a turned-on flashlight at people's or animals' eyes – it can cause temporary

blindness.

8. Do not allow children to use the flashlight without your assistance.

Armytek Optoelectronics Inc. shall not be liable for any harm done to the user if it

was caused by improper use of the product.

Care and Storage

It is recommended to clean the threads and O-rings off dirt and old grease. Remember that secure protection from water and dust

cannot be provided by worn out sealing. And fouling as well as lack of lubricant cause fast wear-out of threads and sealing rings.

To clean the threads do the following:

1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).

2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged

replace it by a new one.

3. Clean the metal threads with a brush using ethanol. Be careful not to allow applied liquid to get inside the flashlight or tailcap as it

can cause fails in functionality of the flashlight.

After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of

automotive and other improper grease can cause swelling and damage of the sealing rings.

In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts

as often as required, even if it is more than twice a year.

In case the rubber button is damaged, it should be replaced. In the same way you can also

replace the switch with the spring.

Replacement order:

1. Unscrew the tailcap.

2. Unscrew the first washer inside it to take out the switch. To do so you should use needle-

nose pliers (round-nose pliers or another tool: most suitable will be expansion pliers). Use

the tool as it is shown at the picture. To replace the rubber button unscrew the second

washer under the switch.

3. Replace the rubber button and assemble the parts in inverse sequence.

Do not disassemble the flashlight except for unscrewing the thread ring gage and replacing the rubber button. There are no

other parts in the flashlight that can be replaced by the user.

Service and Warranty

Armytek provides free warranty repair for 10 years from the purchase.

Warranty doesn't cover damage caused by:

1. Improper usage.

2. Attempts to modify or repair the flashlight by nonqualified specialists.

3. Longtime application in chlorinated or polluted water, or other liquids (other than water).

4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).

5. Usage of low-quality batteries.

Armytek Optoelectronics Inc.

Web: www.armytek.com Email: [email protected]

Address: 67 Vandervoort Dr, Richmond Hill, Ontario, L4E 0C7, Canada

Specifications are subject to change without notice.

Warnings

Predator

THE MOST TECHNICALLY ADVANCED

FLASHLIGHTS IN THE WORLD

USER MANUAL

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

Specifications

Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your

needs applying in them components made in the USA and Japan.

Extreme beam distance up to

381

meters

Impressive brightness

700

LED lumens

Distinct hotspot and minimal spill guarantee directed aim illumination

Standard 1" body diameter matches up with most weapon mounts

Reliable body, red/green/blue filters and original remote switches for comfortable Hunting and secure Military application

Guaranteed durability — stands up the recoil of any gun gauge and falling from 30 meters height

The flashlight works for more than 5 hours at 50 meters depth

Record runtime with 1x18650 Li-Ion battery in all modes

Model

LED

Optics

Brightness stabilization type

Light output, LED / OTF lumens*

Peak beam intensity, candelas

Hotspot/spill

Beam distance*

Hotspot diameter at 100 meters

Modes and runtimes (measured for Armytek

18650 Li-Ion 3100 mAh to the decrease to 10% of

initial brightness)

Power source

Size

Weight (without batteries)

* Light outputs for flashlights with Warm light are about 7% less, beam distances are about 3% less.

We highly recommend NOT to use LOW-QUALITY CR123A batteries as a power source for often and continuous flashlight's

operation. Remember that old or low-quality disposal batteries can be damaged under heavy load and explode.

10 years no-hassle warranty

Predator

Cree XB-H

Smooth Ultra -Throw Reflector

FULL (in Maximum mode - DIGITAL)

700 / 550

36200

4° / 4 0°

381 meters

7 meters

Firefly: 2lm / 18d

Main1: 30lm / 48h

Main2: 150lm / 8.5h

Main3: 310lm / 3.5h

Max: 550lm / 2h 15min

Strobe: 10 Hz / 3h

1x18650 Li-Ion / 2x18350 Li-ion / 2xRCR123 Li-ion / 2xCR123A

Length 154mm, body diameter 25.4mm, head diameter 41mm

135g