Armytek Viking Pro Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Taschenlampe Armytek Viking Pro herunter. Armytek Viking Pro 10 Seiten. Tactical flashlight
Auch für Armytek Viking Pro: Kurzanleitung (2 seiten)

Seite drucken

ENG

USER MANUAL

Thank you for choosing the products of Armytek.

Please read this manual carefully before using the flashlight.

Specifications

Model

LED/Optics

Brightness stabilization type

Light output

Peak beam intensity

Hotspot : Spill

Beam distance

Modes, light output and runtimes (measured

with 18650 Li-Ion 3500 mAh battery until the

light output drops to 10% of the initial value)

Power source

Length/Body diameter/Head diameter

Weight without/with battery

Dust, water and impact resistance

X Light output for flashlights with Warm light is about 7% less, beam distance is about 3% less. All the above specifications are test results based on ANSI/NEMA FL1-2009 Standard.

The tests are performed using the battery included in the set. The data may vary due to environment, heat dissipation and other factors.

• Special precisely calculated reflector for powerful wide LED and tem-

pered glass with anti-reflective coating create large central spot and

wide side spill at 2200 lumens brightness. Spill diameter is 20 meters

at 100 meters distance

• Powerful electronics provides constant brightness even at a tempe-

rature of -40 °C and not fully charged battery

• Two types of operation: hunting and tactical. Tactical operation for

quick access to maximum brightness mode and Strobe mode

• Withstands any recoil due to improved springs and installation of the

driver inside a reinforced capsule filled with protective compound

• Standard 1 inch body is compatible with any accessories, including

original magnetic remote switch and magnetic mount for quick

one-motion attachment and removal

• Two-phase electronic button retained two levels of pressing similar to

mechanical switch, but became noiseless and 20 times more durable

• Non-flat button allows to easily switch the flashlight with a palm

ENG USER MANUAL VIKING PRO

Turbo

Main3

Main2

Main1

Strobe2

Strobe1

Viking Pro (White)

Cree XHP50.2/Textured reflector

FULL (constant light)

2200 lm

20800 cd

11°:40°

288 m

2200 lm/1 h 33 min (940 lm after 3 min)

400 lm/5 h 13 min

150 lm/12 h 20 min

56 lm/32 h

15 Hz/2200 lm/3 h (940 lm after 3 min)

15 Hz/150 lm/23 h

1x18650 Li-Ion

160 mm/25.4 mm/41 mm

135/185 g

IP68. Submersion at 25 m up to 5 h. Fallings from 25 m

• Innovative technology allows using any 18650 Li-Ion batteries with

10A discharge current and provides full protection against short

circuit even in case of contact between magnetic connector and metal

objects

• Solid body made from aircraft-grade aluminium, special matt

anti-abrasive finish without rough knurling

• Steel striking bezel with matte non-reflective black titanium coating,

which prevents location disclosure, is used for additional protection of

the optical system in the event of a fall and as a shock-crushing tool

• Active real-time temperature control to prevent overheating above

+58 °C and warning indication of low battery level

• Total protection from water, dirt and dust in accordance with IP68

standard — flashlight continues to work even at 25 meters depth up

to 5 hours. Withstands fallings from the 10th floor

• Robust and water resistant magnetic connector

REV_00-0000