Discount Car Stereo A2D-BKR Schnellstart-Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Schnellstart-Installationshandbuch für Car Stereo System Discount Car Stereo A2D-BKR herunter. Discount Car Stereo A2D-BKR 9 Seiten. Music streaming module for becker radios with aux menu option
Auch für Discount Car Stereo A2D-BKR: Schnellstart-Handbuch (10 seiten), Schnellstart-Installationshandbuch (10 seiten)

Seite drucken

Frequent asked questions

1.
My vehicle has a CD Changer. Does the A2D-BKR work in vehicles with
CD Changer?
YES;
but the CD Changer, Aux or iPod adapter must be disconnected and
AUX mode enabled through radio menu.
2. Does the A2D-BKR work on all Becker Radios?
NO;
Works on all Becker radios with "AUX" menu option. Becker radios
without AUX option (e.g. CR-210, CDR-210, CR-1 etc.), are not compatible,
however if vehicle has a working CD Changer, see our
3. My vehicle has factory Hands-free kit and I'm told that will not work
with this part. Is that true?
Nonsense!!
The factory kit supports Bluetooth HPF profile but does not
support A2DP profile (and is why users can't stream). The A2D-BKR adds
music streaming and will not interfere with existing hands-free kit. To
install the A2D-BKR and retain factory hand-free kit, our
(sold separately) is required.
4. Can I control my Smartphone music from the radio buttons?
NO;
you must continue to use audio device (e.g. Smartphone) built-in
controls and display to operate the device.
5. Can I pair or save more than one device to the A2D-BKR?
YES;
more than one device (slaves) can be paired however only one
connection can be active at a time.
6. How do I switch from streaming to optional aux input?
Simply disable Bluetooth on smartphone and within seconds, module will
switch to aux input. Aux input will not play if module is paired to smartphone.
7. Can I use A2D-BKR to make/receive phone calls?
No;
The A2D-BKR support music streaming only. Purchase our
for phone calls and music streaming.
8. My phone scans but does not pair with module. What I'm I doing wrong?
Many Ferrari, Porsche etc. radios are able to be turned on without the key,
however for the module to power on; ignition must be set to ACC or ON
position at which point pairing is enabled.
9. I'm getting noise that increases with engine speed. Is this normal?
If you experience alternator whine (increases with engine speed), we
recommend adding a noise filter (e.g. NF3A) to power/ground supply lines.
Here is how to install noise filter:
If necessary, remove black tape from harness.
(You will be working with black and red wires on black plug (to radio) See
Fig. 10— DO NOT CUT FACTORY WIRES
A2D-BKRCD
ISO8-HAR
harness
A2DIY-BKR
Disclaimer
• This product has no affiliation with Porsche, Becker etc.
• We're not liable for misuse of this product.
•We recommend professional installation.
Email
© 1995-2021-01-26 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change
without notice. Other products and companies referred to herein are trademarks or registered trademarks of their
respective companies or mark holders
a. Cut red and black wire about 2 inches away from 8-pin plug
b. Connect filter OUT red wire to red wire (from module)
c. Connect Filter OUT black wire to black wire (from module)
d. Connect filter IN red wire to red wire (To filter In)
e. Connect filter IN black wire to black wire (To filter in)
Fig. 10