Discount Car Stereo BLU-C5 Anleitungen zur Installation - Seite 5

Blättern Sie online oder laden Sie pdf Anleitungen zur Installation für Zubehör für Kraftfahrzeuge Discount Car Stereo BLU-C5 herunter. Discount Car Stereo BLU-C5 12 Seiten. Music streaming module for seelect 1997-04 corvette
Auch für Discount Car Stereo BLU-C5: Installationshandbuch (9 seiten), Installationsanleitung Handbuch (12 seiten), Installationshandbuch (10 seiten), Installationshandbuch (8 seiten), Installationshandbuch (12 seiten)

10-pin connector

3. Tap installation harness red wire to 12V accessory supply in vehicle

Where to get 12V Accessory supply:

1997-03 vehicles have a 3-pin plug under passenger toe board near BCM (may

be covered in black duct tape) -- See Fig. 9

Yellow wire is ACC.

If vehicle does not have 3-pin plug; go to Alternate 12V Acc.

supply below.

Note: 3-pin plug may not be present in all vehicles and may have been

omitted from model year 2004.

Fig. 8

Fig.

Alternate 12V Acc. supply:

We recommend taping fuse #22 or #11 of interior fuse box

located under passenger seat behind toe board (See Fig. 11).

The add-a-fuse

mini-tap

circuit seen in Fig. 10 may be use for this purpose.

How to use the Add-a-fuse circuit connection

3. Strip 1/4- 3/8" insolation from included accessory wire.

4. Look inside blue connector to see where metal ends. Useful in step d.

5. Insert stripped wire to blue connector (See Fig. 10)

6. Hold wire in place and crimp down (crimping too, plyers etc.) After

crimp, pull wire to verify crimp integrity.

7. Remove fuse #22 or #11 (if present) from vehicle fuse box otherwise

skip to step g.

8. Insert factory fuse to empty slot on add-a fuse circuit

9. Insert add-a-fuse circuit to fuse slot #22 or# 11

Noteworthy: If fuse slot #22 or #11 are empty, vacant slot on add-a-fuse

remains vacant. Turn ignition "ON" and verify module blue LED is flashing,

otherwise check voltage at fuse slot and/or check add-a fuse crimp integrity,

Fig. 10

fuse tap circuit