Discount Car Stereo A2D-BLAU10 Installationshandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Installationshandbuch für Auto-Empfänger Discount Car Stereo A2D-BLAU10 herunter. Discount Car Stereo A2D-BLAU10 7 Seiten. Bluetooth music streaming i for sprinter and blaupunkt aux ready radios
Seite drucken
Operation
Turn ignition and radio "ON"
1.
Press CD or button combination to enter AUX mode.
2.
Launch Smartphone or tablet streaming application
3.
Use radio volume control button to set playback level.
4.
Playlist and Track selection is *NOT* possible from
the radio. You must use audio devices built-in
controls to access audio files.
If correct operation is confirmed go ahead and push radio back into
5.
slot
Engine Noise:
If you experience alternator whine (noise increases with engine speed), We
recommend adding a noise filter (e.g. NF3A) to power/ground supply lines
(red/black wires)
Installation:
Noise filter is installed between male plug and module as seen in Fig.8
(Do not cut factory harness/wires)
If necessary, remove black tape
(The harness black (ground) and red (ACC) wires to module are of interest
a. On 8-pin plug, cut red and black wires about 2 inches away from
plug
b. Mate module red wire to filter OUT red wire
c. Mate module black wire to filter OUT black wire
d. Mate black wire from 8-pin plug filter IN black wire
e. Mate red wire from 8-pin plug to filer IN red wire.
Fig. 8