BLADEZ ION 450 Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Scooter BLADEZ ION 450 herunter. BLADEZ ION 450 16 Seiten. Electric power board

Integrated Seat Base

The ION 450 comes with a seat base built in to

the scooter. Having this base built in to the

scooter will make it easy to install and uninstall

the seat quickly and easily. To install the seat,

remove the pin from the side of the scooter.

Then place the seat post into the base on the

deck. Replace the pin in the side of the scooter

to secure the post. Place the seat on the seat

4. Insert the bolt with the handlebar clip into the

top hole and push through the steering tube.

Insert the other bolt into the lower hole and

push through the steering tube. Secure the

bolts with the two acorn nuts (Fig. D).

Unfolding

1. To unfold your ION 450, hold the unit with one

hand, while gently pulling up on the handlebars

with the other. (FIG. 1)

2. Fully extend the handlebars to their upright

position until you feel the mechanism lock into

place. (FIG. 2)

Page 7

Seat Post

Seat Pipe

Clamp