BLADEZ PB-SM804SB Produkt-Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Produkt-Handbuch für Scooter BLADEZ PB-SM804SB herunter. BLADEZ PB-SM804SB 16 Seiten. Electric power board

Tire Pressure

The tire must be inflated to a maximum of 60 P.S.I.. It is also recommended to use a tube

additive like Slime purchasable from any motorcycle shop, to avoid inconvenient punctures.

Caution: Completely deflate tire prior to disassembly of wheel as the split rim is under

considerable pressure while tire is inflated.

The head unit will should come adjusted from the factory. However, riding on rough terrain and

general use may cause the head unit to become loose over time. It may be necessary to adjust

the head unit from time to time.

DO NOT over tighten as it will make it difficult to steer and may damage the bearings.

To adjust the head unit:

1. Rotate the handle bar as far right as it will go to expose

the HEAD UNIT (Fig. 10).

2. The head unit bearings are held in place by two 40mm

nuts on the underside. These nuts are separated by a

spacer. The top nut provides the adjustment, while the

lower nut is a jamb-nut intended to hold the adjustment

nut in place.

3. Loosen the lower nut 3-4 turns.

4. Tighten the top adjuster nut to the desired amount, and

the re-tighten the lower jamb-nut.

Page 13