Discount Car Stereo A2D-HON03 Installationshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Installationshandbuch für Car Video System Discount Car Stereo A2D-HON03 herunter. Discount Car Stereo A2D-HON03 5 Seiten. Bluetooth music streaming
Seite druckenInstallation 2 – vehicles with external device
These install steps apply to vehicles with Sirius XM (Expired or active
subscription), remote CD changer (not referencing CD changer built-into radio)
or separate CD/Cassette player. If Sirius XM has expired, an AUX input jack is
provided for users to connect and play portable audio devices (e.g., MP3 player,
iPod etc.)
Remove radio from dashboard to gain access to connector. (Vehicle specific
radio removal instructions are not part of this guide, but may be available upon
request)
Locate 14-pin plug (white) on the back/bottom of headunit.
1.
Disconnect 14-pin plug and connect to adapter harness 14-pin socket
2.
Connect adapter harness 14-pin plug to radio socket vacated in step 2.
3.
Vehicles with SiriusXM module without subscription.
4.
Connect supplied audio cable to 3.5mm jack on module and route other
end to front of the dash or where audio device will reside (within 3 ft.)
Proceed to next step.
5.
Pairing
Pairing process varies among devices but basic steps are the same. This
process is done upon initial install and will not have to be repeated.
1.
Turn Ignition and Radio "ON"
LED inside module peephole will flash (pairing mode)
Settings, Wireless & Networks, Bluetooth
2. On A2DP device: Go to
Settings
Bluetooth
3. Select
and turn on.
4. Select Bluetooth settings
5. Tap
Scan (Search) for devices
6. Wait for Bluetooth device name to appear and select it
DisCarSt will be shown for vehicles with remote CD changer, SiriusXM
or slave CD/Cassette player,
SKY International will be shown for vehicle without external device.
LED inside module peephole will glow steady (paired)
.