Discount Car Stereo BLU-C5 Installationsanleitung Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Empfänger Discount Car Stereo BLU-C5 herunter. Discount Car Stereo BLU-C5 12 Seiten. Music streaming module for seelect 1997-04 corvette
Auch für Discount Car Stereo BLU-C5: Installationshandbuch (9 seiten), Anleitungen zur Installation (12 seiten), Installationshandbuch (10 seiten), Installationshandbuch (8 seiten), Installationshandbuch (12 seiten)

Introduction

The BLU-C5 module, adds music streaming capabilities to all C5 with original CD

or Cassette radio (Bose o non-Bose). User elect to install module behind the

radio or (if available) to 10-pin plug in trunk/hatch. If vehicle has optional 12-disc

changer; it must be disconnected. To retain 12-disc changer purchase our

A2D-C5

instead. Once installed, pair smartphone, tablet etc. and stream Apple

music, navigation, Spotify, XM radio, Pandora, audio books and other application

while on the road to work or cruising around town.

Note: The BLU-C5 does not interfere with existing radio operation; however,

optional 12-disc changer (if present); must be disconnected.

For more, go to frequently asked question at the end of this guide.

Installation 1: (

To radio with PXHGM4 harness

Using the PXHGM4 harness, users connect module behind radio

cavity. 12-disc changer (if present) must be disconnected at

changer location. With the PXHGM2 harness, users connect

module to 10-pin plug in trunk/hatch and should proceed to

installation 2 on page 4.

Click links below for radio removal video)

Radio removal required. (

https://www.youtube.com/watch?v=Gcrlufo1ctc

https://www.youtube.com/watch?v=WTbWYNJTSDs

Press black release tab to disconnect factory 20-pin plug (See Fig. 1)

C5 radio connector

)

Fig. 1

2. Connect factory 20-pin plug removed from radio to matting connector

on installation harness (See Fig. 2).

Fig. 2

PXHGM4 installation harness

3. Connect installation harness 20-pin black/gray (See Fig. 2) to radio

20-pin connector vacated in step 1

4. Ensure module dip-switches #3 and #8 are "ON" or down (See Fig. 3)

Fig. 3

5. Connect installation harness 22-pin Molex plug (See Fig. 2) to module

22-pin Molex connector (See Fig. 4)

Fig. 4