Discount Car Stereo JAG-HF Schnellstart Bluetooth Installationshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart Bluetooth Installationshandbuch für Empfänger Discount Car Stereo JAG-HF herunter. Discount Car Stereo JAG-HF 10 Seiten. Bluetooth kit for jaguar xk and xj with cd changer
Auch für Discount Car Stereo JAG-HF: Installationshandbuch (10 seiten), Schnellstart-Handbuch (10 seiten)

Seite drucken

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

Introduction:

Safety comes first when you're on the road, so having an intuitive and easy to

use Bluetooth kit is essential to reducing driver distraction. The JAG-HF kit is

compatible with virtually all Bluetooth phones, and sounds great whether you are

using it for mobile conversations or streaming music. In addition to Bluetooth,

the JAG-HF provides a 3.5mm Audio input which can be used to connect

and play audio devices such as MP3 Players, iPods, Zune, iPads etc. (this

audio input replaces CD changer playback). The built-in USB charging port

can be used to charge devices (2A), however for larger current hungry devices

(e.g., iPhone 8 and newer), we recommend adding optional

Charge" kit. The AUX audio adapter connects at changer in trunk or hatch and

Bluetooth module installs beneath center console glove box (armrest).

CD changer required, remains connected but will no longer play.

CD changer playback, purchase our

See Frequently Asked questions at the end of this guide

Audio module Installation:

Remove carpet trim piece surrounding audio rack

Remove (4) 8mm nuts securing rack to vehicle.

wiring and connections are behind the units

Locate single thick black cable from CD changer (connects changer

to Amplifier in premium systems or radio in standard systems)

(See Fig. 1)

USB-DMA3

"Fast

To retain

JAGCD-HF

instead.

Noteworthy: There are similar size/color cables in this area. The

single thick black cable from changer chassis is the correct one.

Fig. 1

Remove cable from holding tab and disconnect by grasping both plugs

and gently pulling apart

(do not twist)

Once disconnected; note Fig. 2- CD changer female connector (right),

amplifier/radio plug (left).

Fig. 2

Connect audio module right angle plug (See Fig. 3) to CD changer

connector.

Note: Module right-angle plug (See Fig. 3) does not have an alignment

arrow indicator; however, the imaginary arrow (See Fig. 3) must be

opposite arrow indicator on factory CD changer connector. Once

aligned mate both

(do not

twist).