Blagdon 3000-6000 Gebrauchsanweisung Handbuch - Seite 12
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung Handbuch für Teichpumpen Blagdon 3000-6000 herunter. Blagdon 3000-6000 16 Seiten.
Message
Issue
displayed on
digital display
Jammed, Clean
An object has
Impeller,
caused an
Clean Rotor.
obstruction of
the impeller –
stopping it from
being able to spin.
Low Water, Add
The water level
Water
in the pond has
dropped.
Check pump
Either:
cable and
-The plug from
connector
the pump to the
controller has not
been connected
correctly.
-Or, there may
be damage to the
pump cable.
Action required
Reset power
Turn off the pump
at the socket , open
blocked for a period of
the cage, clean the
time the display will read:
impeller and impeller
jammed clean pump clean
chamber – ensur-
rotor reset power. After
ing to remove any
cleaning turn the power
obstructions
off at the mains supply for
a minimum of 5 seconds
to enable the pump to run
again
Add dechlorinated
water to raise the
without water for a period
water level back to
of time, the display will read:
original depth.
low water add water reset
power. After adding water,
or solving any leaking issues,
turn the pump off at the
mains power supply for a
minimum of 5 seconds to
enable the pump to run
again.
- Ensure the plug is
fully inserted into
connector is correctly
the socket on the
inserted, turn the power
controller.
off at the mains supply for
- Check cable for any
a minimum of 5 seconds
damage, if damage is
to enable the pump to run
found, cease using the
again.
pump.
If the pump has remained
If the pump has been
After ensuring the