DiscountRamps TBSR-60 Anleitungsblatt - Seite 3

Blättern Sie online oder laden Sie pdf Anleitungsblatt für Zubehör für Kraftfahrzeuge DiscountRamps TBSR-60 herunter. DiscountRamps TBSR-60 4 Seiten.

STEP 1. Place the left and right longitudinal beams (1, 2) on the right side of the pickup bucket, as shown

in figure I, to see if drilling is needed, if you need to drill,confirm the drilling position first, remove the

left and right longitudinal beam (1, 2) .Drill the diameter of 13 hole with the hand electric drill,then

assemble right longitudinal beam(1),With the outer hexagonal bolt full thread (4)into the 12 Spring

washer (5), 12 large flat washer (6), the right longitudinal beam (1) on the U-type mounting plate (3) in

turn, all bolts tightened and fixed. The left longitudinal beam (1) is installed the same as the right one

as shown in Fig.1.

Fig.1