DiscountRamps Silver Spring THR4 Anweisungen - Seite 3

Blättern Sie online oder laden Sie pdf Anweisungen für Hebesysteme DiscountRamps Silver Spring THR4 herunter. DiscountRamps Silver Spring THR4 4 Seiten. Aluminum modular self-supporting threshold ramp

Seite drucken

(Step 2 Continued) After it's determined where

each piece will go, align the front of the ramp ex-

tension into the back of another extension piece

and slide together until the screw holes match up.

Fig. 2b

Use one tapping screw to secure each ramp

section together. Repeat until all extension pieces

are secured to each other.

Fig. 2c

Step 3. The adjustable top flap is optional during the use

of the ramp. The top flap should NOT be used when it may

interfere with opening and closing a door.

Align the end of the adjustable flap to the end of the highest

ramp extension piece. Slide the flap through until the screw

holes align.

Use one tapping screw to secure the flap to the ramp.

Fig. 3

Installation

Step 1. Once assembled, take the ramp

Fig. 4

to the desired location and put the back

flush against an elevated threshold.

Step 2. For permanent mounting, mark

the surface below where the two holes

are on the adjustable flap (optional) and

the two holes are on the base of the

ramp. Drill holes where marked.

Step 3. Use included flat head bolts for securing the ramp into place through the mounting holes

shown above.

Rev. 011620

Page 3

DiscountRamps.com • 1-888-651-3431