3D Gadgets MAGBOT DE-10 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für 3D-Drucker 3D Gadgets MAGBOT DE-10 herunter. 3D Gadgets MAGBOT DE-10 16 Seiten.

Seite drucken

Basic installation

FILAMENT HOLDERS
FILAMENTS
1. Insert filament to the PTFE
tube 1 behind the printer
2. Insert filament to the PTFE
tube 2 behind the printer
3. Pull the filament from the
inside top center
4. Preheat the extruder
temperature to 200 C)
5. Press the extruder handle
down and insert the
filament to the extruder
hole and push it all the way
in.
6. From the LCD main screen
click Extrude > Set to 10mm
> Click In.
7. Continue to click in until
filament is extruding from
the nozzle.
2
1
1
3
(Set
5
7
•
Install the filament holders
from the Kit provided
•
Ensure the screws are
screwed outwards
2
4
6
Extruder 1
Extruder 2
8