3D Global SCALEREO Schnellstart-Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Mikroskop 3D Global SCALEREO herunter. 3D Global SCALEREO 4 Seiten. Stereo 3d video microscope system
Seite drucken4.3 Lighting modes (available only at SCALEREO-Desk)
There are 7 different modes for the LED light system:
OFF
Ring Left
4.4 Headtracking modes
4.4.1 Freeze
•
Press "Freeze" to instantly pause the headtracking system. The user´s current position
is "freezed" and the user is no more tracked, thus he needs to re-position himself in this
position to get correct 3D.
o
This mode is useful to temporally use the system with multiple users simultaneously, e.g. to explain something
•
Press "Freeze" again to run the headtracking system in its last used mode
4.4.2 Headtracking working modes
•
Press "Mode" to toggle between the 2 pre-activated headtracking modes:
o FINE
o OFF
If required, the following two additional headtracking modes can optionally be enabled in
the settings menu (refer to the user manual for detailed information):
o COARSE
o 2D FORCED – Forced 2D visualization
When the headtracking system is "OFF" or in "freeze mode",
the display works in untracked "BlackMatrix" mode, which means that
certain black areas are projected into the edge-areas of the viewing zone.
This simplifies the correct positioning within the viewing zones, even for more than one user.
TD_QSG_SCALEREO_EN
All
Right Middle
Ring Right
– Continuous, immediate tracking of the viewing position
The image is tracked to the user's current position even if the user's
position changes only very slightly.
When this mode is activated, "User Tracking FINE" appears briefly on
the screen.
– No active tracking of the 3D viewing position
The user must be positioned optimally in the viewing zone located
centrally in front of the display.
Permanent overlay of "User Tracking OFF".
– "Rough" tracking of the viewing position with low hysteresis
Rev. 2.0 / 19.04.2022
Central
Ring All
Page 4 / 4