ARO PX10R-XAX series Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Water Pump ARO PX10R-XAX series herunter. ARO PX10R-XAX series 8 Seiten. 1” diaphragm pump 1:1 ratio (metallic) pd10x-x-x pe10x-x-x
Product discharged from exhaust outlet.
Check for diaphragm rupture.
Check tightness of (14) diaphragm washer.
Air bubbles in product discharge.
Check connections of suction plumbing.
Check O" rings between intake manifold and inlet side
fluid caps.
Check tightness of (14) diaphragm washer.
Motor blows air or stalls.
Check (176) check valve for damage or wear.
Check for restrictions in valve / exhaust.
(Dimensions shown are for reference only, they are displayed in inches and millimeters (mm).
Air Inlet 1/4 -18 NPT
G
B
M
D
A - 12-11/32" (313.2 mm)
B - 11-9/16" (293.7 mm)
C - 4" (101.6 mm)
D - 1-1/4" (31.8 mm)
PX10A-XXX-XXX
-
PX10R-XXX-XXX
11-3/32" (281.3 mm)
-
PX10S-XXX-XXX
-
Page 8 of 8
TROUBLE SHOOTING
DIMENSIONAL DATA
1 - 11-1/2 NPTF - 1 (PX10X-AXX-XXX)
1 - 11 BSP (PX10X-BXX-XXX)
A
Q
P
Outlet
Inlet
K
C
DIMENSIONS
E - see below
F - see below
G - 12-7/16" (315.9 mm)
H - 6-1/4" (158.8 mm)
"E"
"F"
------
8-1/8" (206.4 mm)
8-5/16" (211.1 mm)
------
8-3/16" (207.9 mm)
Low output volume, erratic flow, or no flow.
Check air supply.
Check for plugged outlet hose.
Check for kinked (restrictive) outlet material hose.
Check for kinked (restrictive) or collapsed inlet material
hose.
Check for pump cavitation − suction pipe should be
sized at least as large as the inlet thread diameter of the
pump for proper flow if high viscosity fluids are being
pumped. Suction hose must be a non-collapsing type,
capable of pulling a high vacuum.
Check all joints on the inlet manifolds and suction con-
nections. These must be air tight.
Inspect the pump for solid objects lodged in the dia-
phragm chamber or the seat area.
-
-
Exhaust Port 3/4 - 14 NPT
N
J - 7-5/16" (185.7 mm)
K - 13/32" (10.3 mm)
L - 1-1/2" (38.1 mm)
M - 6-15/32" (164.3 mm)
"R"
14-1/32" (356.2 mm)
------
13-27/32" (351.4 mm)
R
E
F
L
H
J
Figure 4
N - see below
P - 5-27/32" (148.2 mm)
Q - 12" (304.8 mm)
R - see below
"N"
PX10X-XAX-XXX
1/4" (6.4 mm)
-
PX10X-XCX-XXX
9/32" (7.1 mm)
-
PX10X-XHX-XXX
9/32" (7.1 mm)
-
PX10X-XSX-XXX
9/32" (7.1 mm)
-
PN 97999-1068
PD10X-X-X (en)