Cubert S185 Hardware-Betriebsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Hardware-Betriebsanleitung für Digitalkamera Cubert S185 herunter. Cubert S185 17 Seiten.

Seite drucken

1. Technical Data Sheet, Camera

1 Safety notes

Avoid vibration or shocks on

the camera.This is a high-pre-

cision

The camera's case provides a certain

protection against liquid entry or

intrusion of foreign particles. However,

if water, steam, other liquids or particles

intrude into the camera there is a risk

of fire and electric shock.

1. Separate the power supply of the camera.

2. Separate the connections between camera and PC as well as camera and its power supply.

3. Contact Cubert support immediately.

Do not, under any

circumstances,

operate or store the

camera at one of the

following locations:

You must not, under any circumstances, connect devices or cables other than those ones shipped

with the camera to the camera. Solely utilize original accessories and original spare parts. Connecting

an inappropriate device or cable may risk fire or electric shop or may damage the camera as well the

device/cable. Cubert GmbH is not liable for any damages caused by operating the camera with any

PC other than the shipped one.

Do not disassemble or modify the camera, you risks electric shock, dermal burns or other injuries.

Do not use the camera whilst

driving a vehicle, airplane or

other machine. Inappropriate

usage may cause anacci-

dent.

Furthermore, the guarantee will be void.

In such cases perform the following steps:

Wet, humid or dusty location.

Kitchens or other locations with oily smoke.

Locations with strong vibrations.

In the vicinity of radiators, under direct sunlight or within a closed vehicle subject

to direct sunlight.

In the vicinity of air conditioning or other locations with extreme temperatures,

strong temperature changes or high humidity levels.

Never point the camera into

the sun or any other very

bright light source. Camera

must not be subject to high

energy laser beams.

Operating the camera after a (mecha-

nical) shock or inappropriate treat-

ment, there is a risk of fire and electric

shock.