CUBETAPE C190POS Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Scanner CUBETAPE C190POS herunter. CUBETAPE C190POS 2 Seiten. Parcel dimensioner
Auch für CUBETAPE C190POS: Schnellstart-Handbuch (2 seiten), Konfigurationshandbuch (18 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (4 seiten)
Seite drucken
Battery Warning LED:
LED OFF:
Battery 40% - 100%.
LED Slow Flash:
Battery 20% - 40%.
LED Medium Flash:
Battery 10% - 20%.
Battery below 10% -
LED Fast Flash:
recharge immediately.
Charging:
To charge battery place
the device in the cradle.
Battery is charging
when the charge LED
is
RED.
Battery is fully
charged when the
CHARGE
charge LED is off.
BLUETOOTH
Battery/Power Management:
For power management of USB devices
when PC is in sleep mode:
https://www.top-password.com/blog/
set-windows-to-power-on-off-usb-
devices-in-sleep-mode/
Battery and Tape Compartments:
1.
Remove the silicone rubber sleeve.
2.
Slide the back cover open and remove it.
3.
Remove the tape cassette or battery.
1
2
Sleeve
3
Push in the
direction of
the arrow
Tape Cassette
Battery
C190POS Quickstart Guide
V ERSION 1.0.1
Register your device at
www.cubetape.com/register
C190POS is a precision measuring instrument and barcode scanner with a wide range
of configurable options including measurement units, precision and data formatting and
will connect to most platforms including Windows Android and iOS. Cubetape scanner
dimensioners have factory defaults set for common terminal, communication and
measurement requirements. Settings can be changed by scanning the barcodes in
this guide with further options available at
1. Power ON:
Hold down 'm' button for
2
seconds.
Power OFF:
Hold down 'm' button for
5
seconds.
2. Cradle Install on PC:
LED on cradle confirms
power connection.
3. Connect Cubetape to Cradle:
Scan Cradle Pairing Barcode to pair.
Blue LED solid when connected.
For full manual go to
www.cubetape.com/downloads
For support email
support @ cubetape.com
Some features in this guide are unsupported in product with SN prior 201xxxx.
www.cubetape.com/downloads
'm' Button
PC
USB Cable
Cradle
Cradle
Pairing
Barcode
C190POS
Quickstart Guide
V ERSION 1.0.1
Register your device at
www.cubetape.com/register
Measuring Techniques:
1.
Hook the tape end over the
far edge of the package.
2.
Align the tape exit to the
near edge.
3.
Press the 'm' button to
record and transmit the
measurement.
3
1
2