3D Hobby Shop Extra SHP 47" Montageanleitung - Seite 20

Blättern Sie online oder laden Sie pdf Montageanleitung für Flugzeuge 3D Hobby Shop Extra SHP 47" herunter. 3D Hobby Shop Extra SHP 47" 20 Seiten. Arf rc

Seite drucken

After you have completed all of your radio setup, take the model outside and install your propeller. Test

run your power system in a safe manner. Recommended power level for the Extra is 350-440 watts.

NOTE: Small brushless motors typically have aluminum prop adaptors with aluminum screws threads.

These threads are easily stripped or broken. DO NOT apply too much torque when tightening your

prop. A wrench is not necessary, it applies too much torque. We prefer a nut-driver or pliers.

Be sure to check the motor manufacturer's recommendations for help in selecting a prop. Good props for

the 47" Extra are 12x6 APC E and 13x6.5 APC E.

Recommended Equipment for the 47" Extra:

Motor

Omega 103g1030KV

ESC

Hacker X-55 SBEC

Spinner 40mm or 1.75" electric

Servo

Hitec HS-65MG

Extensions

2 x 12"

3 x 6"

Battery

3S 2200-2650mah 25C lipo

Special note about servo arms:

3DHS manufactures longer servo arms for the Hitec HS-65 servo. Some transmitter setups require

longer servo arms to achieve full 3D throw.