Cubicon Style 3DP-210F Schnellstart-Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für 3D-Drucker Cubicon Style 3DP-210F herunter. Cubicon Style 3DP-210F 14 Seiten.

Be careful when unpacking and installing the product, as excessive force or ripping can

damage the content.

Unpacking

Pay attention not to damage the Drive cable of extruder or Teflon tube being pulled, bent,

stabbed to affect the operation of extruder and filament feeding.

① Place the package on the floor and

remove the side packing materials

including the accessories.

Pay attention not to drop the packing

materials including the accessories.

② Pull the product out of the vinyl bag and

move to its installation place.

Hold the product and take it out of the

box. Holding the vinyl and taking it out

will damage the product.

③ Remove the inside and outside tape. (There will be taped except for the place in picture).

This document is Quick Start Guide (151001,En). To improve quality of product, this could be revised without

prior notification or consent.

HyVISION System is not liable for any losses resulted from the use of the document or any errors or offering.

Unpacking and Installation (1/4)