Aroma Outfitters 3D Glass Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör Aroma Outfitters 3D Glass herunter. Aroma Outfitters 3D Glass 8 Seiten. Diffuser

When the water level in the tank is too low or at zero, the diffuser stops automatically. To go back to normal operation,

top off the water up by following the « Precautions for use » steps.

You are advised to change the water frequently in the tank and clean the diffuser once or twice a week, particularly

if you want to change the fragrance to be diffused.

1. Turn the appliance off and unplug it.

2. Remove the covers and empty the water on the opposite side of the air outlet. Do not empty the water in the

air outlet, this can damage the diffuser.

3. Clean the diffuser water tank using a soft damp cloth. If needed, use a little white vinegar strongly diluted. Do

not use corrosive detergents. Carefully rub the ceramic disc with a cotton bud being careful not to scratch

it.

Input power supply : AC 100-240V, 50/60Hz

Output power supply : DC24V 500mA

Ceramic disc lifespan: +/- 3000 hours

Correct Disposal of this product. This marking indicates that this product should not be disposed with

other household wastes throughout the EU. To prevent possible harm to the environment or human

health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of

material resources. To return your used device, please use the return and collection systems or contact

the retailer where the product was purchased. They can take this product for environmentally safe

recycling.

Air outlet

Empty the water in the opposite side of the

air outlet. Do not allow water into the air

outlet, this would damage the diffuser.

TECHINAL SPECIFICATIONS

MAINTENANCE

Tank capacity: 200 ml

Dimensions (approx) : Ø 15.3 cm x H 15 cm

Recommended for a surface of: 30 m²