CubuSynth VCFA Handbuch erstellen - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch erstellen für Musik-Pedal CubuSynth VCFA herunter. CubuSynth VCFA 14 Seiten. Multimode vcf with lp,hp and bp outputs and integrated vca
Auch für CubuSynth VCFA: Handbuch (5 seiten)
Seite druckenCubuSynth VCFA - Build Guide
There is different ways to go, you might already
have developed your own method to place the
components and solder.
You can always select the resistors of the same
value, place them, turn the board around and
solder in place. Trim the solder legs and move on
to the next value.
Another method is to place all resistors and solder
them from the top, without turning around the
board.
Here is a picture of all resistors in place.
To help keeping track of the already placed
components, print the BOM and cross out the parts
you already soldered.
STEP 3 (Main PCB)
ceramic capacitors
2
10
Find the ceramic capacitors
1nf is marked as "102"
100nf is marked as "104"
Orientation doesn't matter. Put them in place and bend the solder legs outwards, so they don't
fall when turning around the board.
Solder all ceramic capacitors in place. On the next page you can see the placement of the 1n
(here in yellow) and the 100n capacitors.
Page 4
1n
C10,C5
100n
C20,C19,C14,C13,C12,C11,C4,C3,C2,C1
PCB V1.2 Sept 2022