CubuSynth Engine Handbuch erstellen - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch erstellen für Musikanlagen CubuSynth Engine herunter. CubuSynth Engine 20 Seiten. Dual complex vco with wave shaping and modulation features

Seite drucken
CubuSynth Engine - Build Guide
STEP 11 (Main PCB)
Trimmers
Place the 6 Trimmers according to the marking on the PCB, like shown in the picture below.
2
V/O trim
2
Hftrim
2
SineSymmetry
STEP 12 (Main PCB)
Toggle Switches /
Pin headers
Place the toggle switches in the correct spots. The On/Off/On (3position) is the leftmost one.
Don't solder yet!
1
MINI TOGGLE On/Off/On
2
MINI TOGGLE On/On
Take the 2x10 and 1x15 Pin Headers (Male) and Sockets (Female) and put them together. Place
them on the Main PCB, with the female header down, but don't solder yet!
On the next page you can see the correct placement of the switches and the pin headers.
2
HDR-F-2.54_1x10
2
HDR-F-2.54_1x15
Page 12
TRIM2_10K,TRIM4_10K
TRIM1_20K,TRIM3_20K
TRIM5_100K,TRIM6_100K
SYNC2
SYNC1,1V/O_LINK
H6,H5
H2,H1
PCB V1.1 May 2022